BODY 1U3510 - Caterpillar

Illustration 13 g03852715
Bolt Type (Long Term Use)
Illustration 14 g03853336
Illustration 15 g03852981
Hoist Rings
Illustration 16 g03853317
Hoist Rings are used with all shackle types.
Illustration 17 g03853189
Swivel
Illustration 18 g03853303
Illustration 19 g03853259
Side Pull
Illustration 20 g03853283
Illustration 21 g03853286
Maintenance
Inspect for excessive nicks, gouges, pitting, heat damage, or corrosion.
Do not store or use around caustic or acid substances.
Illustration 22 g03853457
Avoid unsafe conditions.
Do not exceed rated working load limit (WLL).
Avoid shock loading, sharp edges, or abrasive surfaces.
Do not weld.
Illustration 23 g03853889
Do not use in extreme heat or cold.
Illustration 24 g03854367
Load identification label must be legible.
Illustration 25 g03853899
Inspect for damage or wear.
Illustration 26 g03853902
Inspect pin for pin wear.
Have tools inspected annually by an approved dealership inspector. Maintain a written record of all inspections.Cleaning
Clean tools using a high quality cleaning fluid. Allow to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on tools, which can result in contamination of precision engine components.Storage
Store indoors in a clean, dry location to prevent rust or corrosion. Tooling and threads can be damaged by moisture or high humidity.Tool Disposal
At the end of the operational life of the tool, destroy the tool and dispose of as scrap.