BODY GP-TRUCK 2460789 - Caterpillar

At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the implement hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     4C-4892     ORFS Fittings Group     1    
B     8T-0861     Pressure Gauge
(1)
60000 kPa (8700 psi)     1    
C     4C-9910     Flow Meter
48200 kPa (7000 psi)
13 L/min to 473 L/min (4 US gpm to 125 US gpm)     1    
( 1 ) Part of 4C-4892 ORFS Fittings Group Jaw Circuit
Lower the work tool to the ground and stop the engine