2P2541 BODY AS Caterpillar parts
120G, 12G, 130G, 140B, 140G, 14G, 160G, 16G, 225, 235, 235B, 245, 578, 589, 613C, 615C, 621B, 621E, 621R, 623E, 627E, 631C, 631E, 633E, 637D, 637E, 651E, 657E, 769, 772, 773B, 776C, 785, 789, 815B, 82...
Rating:
Alternative (cross code) number:
CA2P2541
2P-2541
2P2541
CA2P2541
2P-2541
2P2541
Weight: 1 pounds 0 kg.
ARTICULATED TRUCK, WHEEL TRACTOR,
You can buy:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
LEXUNYU Replacement for fits 2P2541 Body A Fits Caterpillar 826C 815B 225 235 235B 120G 12G 130G 140G 14G 16G
LEXUNYU
LEXUNYU
LEXUNYU Replacement for fits 2P2541 Body A Fits Caterpillar Models
LEXUNYU
LEXUNYU
Number on catalog scheme:
2
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tool
Tool Part Number Part Description Qty
A 1H-3107 Bearing Puller 1 Start By:
Remove the oil pump.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the outside of the oil pump. Disassemble the oil pump in a clean area.
Illustration 1 g00550544
Remove the cover (1) and the cover (2) from the back of the oil pump.
Put the oil pump in position. The gears should face upward.
Illustration 2 g00550545
Loosen the bolt (4) from the gear (5) until the washer (3) is 3.20 mm (0.126 inch) from the gear.
Install Tool (A) with the two 0S-1619 Bolts and washers. Tighten the screw in Tool (A). Tap Tool (A) over the oil pump shaft in order to loosen the gear from the shaft. Remove Tool (A) and the gear (5).
Illustration 3 g00550546
Remove the cover (6). Note the location of the dowel in the cover. If necessary, remove the dowel.
Illustration 4 g00550614Note: The bearing in the illustration has an internal groove. New bearings for the engine oil pump will not have an internal groove.
If necessary, remove the bearings (7) from the cover (6). If necessary, remove the dowels from the opposite side of the cover (6).
Illustration 5 g00550615
Remove the oil pump drive shaft (8) from the body of the pump (9).
Remove the oil pump idler shaft (10) from the body of the pump (9).
If necessary, remove the bearings from the body of the pump (9).
Table 1
Required Tool
Tool Part Number Part Description Qty
A 1H-3107 Bearing Puller 1 Start By:
Remove the oil pump.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the outside of the oil pump. Disassemble the oil pump in a clean area.
Illustration 1 g00550544
Remove the cover (1) and the cover (2) from the back of the oil pump.
Put the oil pump in position. The gears should face upward.
Illustration 2 g00550545
Loosen the bolt (4) from the gear (5) until the washer (3) is 3.20 mm (0.126 inch) from the gear.
Install Tool (A) with the two 0S-1619 Bolts and washers. Tighten the screw in Tool (A). Tap Tool (A) over the oil pump shaft in order to loosen the gear from the shaft. Remove Tool (A) and the gear (5).
Illustration 3 g00550546
Remove the cover (6). Note the location of the dowel in the cover. If necessary, remove the dowel.
Illustration 4 g00550614Note: The bearing in the illustration has an internal groove. New bearings for the engine oil pump will not have an internal groove.
If necessary, remove the bearings (7) from the cover (6). If necessary, remove the dowels from the opposite side of the cover (6).
Illustration 5 g00550615
Remove the oil pump drive shaft (8) from the body of the pump (9).
Remove the oil pump idler shaft (10) from the body of the pump (9).
If necessary, remove the bearings from the body of the pump (9).
Cat SIS web machinery list:
Parts body Caterpillar catalog:
572G, 977K, D6C, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2, D8H
16, 173B, 518C, 528, 528B, 530B, 561H, 561M, 613, 613B, 613C, 613C II, 621, 650B, 666, 916, 920, 926, D7G, FB518, IT18, IT18B, IT28, IT28B
594, D8K, D9H
120G, 12G, 130G, 140B, 140G, 14G, 160G, 16G, 613B, 613C, 615, 615C, 627, 651, 777, 816, 910, 988, 988B, D6H, D8H, D8L
183B, 621, 621B, 621R, 623, 623B, 627B, 627E, 631C, 633C, 633D, 641, 641B, 769, 772, 824B, 966C, 977H, 977K, 977L, 980, 980B, 983, 983B, 988, 992
12E, 140B, 950, 953
623E, 627E, 631E, 633E, 637E, 769C, 777, 972G II, 980G, 980G II
936, 936F, 950B, 950B/950E, 960F
173B, 916, 926, D7F, D7G, IT18, IT18B, IT28, IT28B
735, 740, 770, 772, 980G, 980G II, D7F
814B, 815B, 966D, 966F, 966F II
814B, 815B, 950F, 950F II, 960F, 966C, 966D, 966F, 966F II, 970F, R2900, R2900G, R3000H
7L4576
BODY ASSEM.
G342C
G342C
4J0970
BODY
140, 141, 191, 650B, 666, 824S, 920, 941, 951B, G398
140, 141, 191, 650B, 666, 824S, 920, 941, 951B, G398
1M2830
BODY ASSEM.
D320A
D320A
5M1854
BODY ASSEM.
D342C
D342C
7M0953
BODY ASSEM.
D320A
D320A
7H3705
BODY
D342
D342
1198326
BODY
312, 312B L, 315, 315B L, 317, 317B LN, 318B
312, 312B L, 315, 315B L, 317, 317B LN, 318B
0942060
BODY,90 ELBOW
312, 320, 325, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, EL240, EL240B
312, 320, 325, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, EL240, EL240B
0942059
BODY,CONNECTOR
312, 320, 325, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, EL240, EL240B
312, 320, 325, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, EL240, EL240B
1R9115
BODY
312
312
4I6369
BODY AS
307, 312, 315, 317, 320B, 322B LN, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330B L, 350, 375, 375 L, 5080, R1300, R1300G, R1600, R1600G, R1600H, R1700G, R2900, R2900G, R3000H
307, 312, 315, 317, 320B, 322B LN, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330B L, 350, 375, 375 L, 5080, R1300, R1300G, R1600, R1600G, R1600H, R1700G, R2900, R2900G, R3000H
0874668
BODY
307, 307B, 311, 312, 315, 317, 320 L, 322 FM L, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 330B L, E240C, E70B
307, 307B, 311, 312, 315, 317, 320 L, 322 FM L, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 330B L, E240C, E70B