BODY 2S1484 - Caterpillar

2. Loosen bolt (1) that secures refrigerant compressor pulley (2). 3. Loosen bolt (3), to release the tension in refrigerant compressor V-belt (4).4. Remove V-belt (4) from the refrigerant compressor. 5. Loosen bolt (5).6. slide the alternator towards the fan drive.7. Remove V-belts (6). The following steps are for the installation of the V-Belts. Check the condition of all V-belts for wear or damage. If any of the V-belts are worn or damaged, use new parts for replacement.8. Install V-belts (6).9. Install V-belt (4) to the refrigerant compressor.10. Install bolt (1) that secures refrigerant compressor pulley (2).11. Adjust V-belts to the correct tension. Refer to "Specifications Manual, Form No. SENR5546-01" for the correct belt tension.12. Tighten bolts (5) and (3).13. Close the hood assembly.End By:a. install fan & fan guard assembly