BODY AS 3509968 - Caterpillar

Illustration 1 g03410453
Table 1
Specification for 290-9318 Hoe Stick Gp
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores.
1 - - Assemble the stick cylinder so that the grease zerk is directed, as shown.
2 2 166-1498 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
3 2 148-3386 Pin As Diameter is 89.850 0.025 mm (3.5374 0.0010 inch).
4 2 Bushing is one of the following part numbers:
236-8561 Bushing(1) Bore before assembly is 120.20 0.02 mm (4.732 0.010 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
228-5621 Bushing(1) Bore before assembly is 120.259 0.040 mm (4.7346 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
5 2 166-1494 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
6 2 9X-4598 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
7 2 462-2005 Bushing(1) Bore before assembly is 80.181 0.021 mm (3.1567 0.0008 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
8 2 228-5619 Bushing(1) Bore before assembly is 110.222 0.040 mm (4.3394 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
(1) Install the bushing in the bore so that the part number of each bushing is facing outward.