BODY 4601387 - Caterpillar

Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00842162
Remove four bolts (1), ladder assembly (2), and guard (3) .
Illustration 2 g00842165
Attach a suitable hoist and lifting slings to fender assembly (4), as shown.
Illustration 3 g00842177
Remove bolts (5) .
Illustration 4 g00842187
Remove bolts (6), (7), and (8) .
Use the hoist in order to remove fender assembly (4). The weight of fender assembly (4) is 86 kg (190 lb).
Illustration 5 g00842189
The cab has been removed for photographic quality.
Disconnect two hose assemblies (9) from the parking brake valve.
Disconnect three hose assemblies (10) from the brake accumulator charge valve.
Illustration 6 g00842193
Remove bolt (11). Disconnect tube assembly (12) from the fitting.
Disconnect clevis (13) from the parking brake valve.
Disconnect electrical connector (15) and electrical connectors (16) .
Remove three bolts (14) and mounting plate (17) .
Illustration 7 g00842213
Remove bolts (18) and the clamps. Place the harness assembly aside.
Illustration 8 g00842217
Install Tooling (A) on fuel tank (19), as shown. Attach a suitable hoist and lifting slings to Tooling (A) .
Illustration 9 g00842219
Remove bolts (20) .
Illustration 10 g00842226
Disconnect fuel lines (21) .
Illustration 11 g00842230
Remove lower mounting bolts (22) .
Illustration 12 g00842240
Remove upper mounting bolts (23) .
Use the hoist in order to remove fuel tank (19). The weight of empty fuel tank (19) is 215 kg (475 lb).