BODY AS 4677709 - Caterpillar

Improper lifting or tie-downs can allow load to shift and cause injury and damage.
Illustration 1 g03824113For the specifications of the machine, refer to Operation and Maintenance Manual, "Specifications".For specifications of any work tools, refer to the Operation and Maintenance Manual for the specific work tool.
Lifting Mass - The lifting mass indicates the maximum weight of the machine without any work tools.
Lifting Point - In order to lift the machine, attach the lifting devices to the lifting points.
Tie Down Point - In order to tie down the machine, attach the tie-downs to the tie down points.Lifting the Machine
Illustration 2 g03711631Use properly rated cables and properly rated slings in order to lift the machine.Position the crane or the lifting device in order to lift the machine in a level position.
Move the machine into position.
Move the propel lever to the neutral position, and make sure that the parking brake indicator is illuminated. Note: The parking brake is automatically applied when the machine is stopped and the propel lever is in the neutral position.
Turn the engine start switch key to the OFF position. Remove the key.
Attach lifting cables to the lifting eyes. The lifting eyes are identified on the machine by labels. There are two lifting eyes on each side of the machine.
Lift the machine slowly in order to make sure that the machine stays level. Move the machine to the desired position. Tying Down the Machine
Illustration 3 g03711634
Top view of tie down points.
Move the machine into position.
Move the propel lever to the neutral position, and make sure that the parking brake indicator is illuminated. Note: The parking brake is automatically applied when the machine is stopped and the propel lever is in the neutral position.
Turn the engine start switch key to the OFF position. Remove the key.
Chock the tracks.
Use the tie-down positions in order to secure the machine. The tie-down positions are identified on the machine by labels. There are two tie-down positions on each side of the machine. Refer to Operation and Maintenance Manual, "Shipping the Machine" for shipping instructions.Tying Down the Conveyor
Illustration 4 g03834314
Conveyor chain position on the left side of the machine
Illustration 5 g03834315
Conveyor chain position on the right side of the machine
When the machine is in position on the trailer, secure the conveyor with chains. Use a chain on both sides of the conveyor. Run the chain from the conveyor to the tie down point on the frame of the machine.