BODY 4I7627 - Caterpillar

Wheel Loader:
928G (PIN: 6XR1-UP; 7SR1-UP)
Integrated Toolcarrier:
IT28G (PIN: 8CR1-UP; 9AR1-UP)
Service Manual Module, SENR1217, April 1997, "Disassembly and Assembly". The module is part of SENR1215 Service Manual. Insert the following corrections.Page 18 lists the incorrect Spanner wrench. Use the 4C-8502 Spanner Wrench .Page 29 lists the incorrect Spanner wrench. Use the 4C-8348 Spanner Wrench on page 29.Page 31 and step 17 lists twenty bolts. There are only sixteen bolts.Page 34 and step 27 needs additional information. Rotate the pinion shaft back and forth and tighten adjusting nut (26) .Page 34 and step 29 is incorrect. Tighten the adjusting nut (4) to forty degrees and tighten the nut to an additional increment to the nearest locking position.Page 37 and page 38 lists the incorrect part number of the socket. The part number of the socket is the 5P-0954 Wrench.