BODY GROUP 4J6804 - Caterpillar

4J6804 BODY GROUP Caterpillar parts 824, 834, 988

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4J6804
4J-6804
4J6804

Buy BODY GROUP 4J6804 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER, WHEEL LOADER,

Compatible equipment models: 4J6804:

WHEEL DOZER 824 834

WHEEL LOADER 988 Caterpillar

Number on catalog scheme: None

Caterpillar 4J6804 Parts scheme BODY GROUP

For full view, you need register

Information:

Removal Procedure
Illustration 1 g02315313
Removal of the Electronic Control Module (ECM) may be necessary in order to remove the atmospheric pressure sensor. If necessary, remove the electronic control module. Refer to Disassembly and Assembly, "Electronic Control Module - Remove and Install" for the correct procedure.
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1).
Remove atmospheric pressure sensor (3) from the bracket for the ECM. Installation Procedure
Illustration 2 g02315313
Install atmospheric pressure sensor (3) to the bracket for the ECM. Tighten atmospheric pressure sensor (3) to a torque of 10 N m (89 lb in). Note: The atmospheric pressure sensor should not be installed with an O-ring seal.
Connect harness assembly (1) to atmospheric pressure sensor (3). Slide locking tab (2) into the locked position.
If removal of the ECM was necessary, install the ECM. Refer to Disassembly and Assembly, "Electronic Control Module - Remove and Install" for the correct procedure.