BODY 5J3851 - Caterpillar

Quick Coupler (2)
This message is located in the cab on the right side window.
Illustration 5 g01231702Read the Operation and Maintenance Manual.Perform the steps that are illustrated on the message in order to unlock the coupler.Perform the steps that are illustrated on the message in order to lock the coupler.When the coupler is installed, use care when you move the stick or the bucket.Refer to Operation and Maintenance Manual, "Quick Coupler Operation" for further information.Alternate Exit (3)
If equipped, this message is located in the upper right corner of the rear window.
Illustration 6 g01396255If the Primary exits are blocked, pull the ring in order to open the rear window. Exit the machine through the window opening.For more information, refer to Operation and Maintenance Manual, "Alternate Exit".Ring for the Alternate Exit (4)
If equipped, this message is located on the ring for the alternate exit.
Illustration 7 g01396259Pull the ring in order to open the alternate exit. Exit the machine through the window opening.For more information, refer to Operation and Maintenance Manual, "Alternate Exit".Machine Security System (5)
This message is located on the window on the right side of the cab.
Illustration 8 g01396277This machine may be equipped with a security system. Read the Operation and Maintenance Manual before you operate the machine.Refer to Operation and Maintenance Manual, "Machine Security System".Data Privacy (6)
This message is located on the window on the right side of the cab.
Illustration 9 g01418953The Product Link System is a satellite communication device that transmits information regarding the machine back to Caterpillar and Caterpillar dealers and customers. All logged events and diagnostic codes that are available to the Caterpillar Electronic Technician (ET) on the CAT data link can be sent to the satellite. Information can also be sent to the Product Link System. The information is used to improve Caterpillar products and Caterpillar services.Refer to Operation and Maintenance Manual, "Product Link" for more information.Alternate Exit Lock/Unlock (7)
If equipped, this message is located on the rear window in the cab.
Illustration 10 g01353053
Unlock alternate exit window during machine operations.
Move the lever to the left to the UNLOCK position. Move the lever to the right to the LOCK position. Exit through rear window.For more information, refer to Operation and Maintenance Manual, "Alternate Exit".Radial Air Cleaner (8)
This message is located on the cover of the air cleaner.
Illustration 11 g01134494In order to avoid engine damage, replace old filters with radial seal air filters.The location and design of the gasket for the radial seal air filter is critical to the proper operation of the air cleaner element. Use only Caterpillar replacements.Refer to Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace".Alternate Joystick Control Patterns (9)
This message is located behind the front left side access door.
Illustration 12 g01233974The machine control pattern can easily be changed to the SAE system or to the standard backhoe loader hydraulic system (BHL) by changing the position of the two-way valve (if equipped).Refer to Operation and Maintenance Manual, "Joystick Controls Alternate Patterns" for further information.Counterweight (10)
This message is located underneath the cover on the counterweight.
Illustration 13 g01435946Do not tighten the counterweight