5J4032 BODY GROUP Caterpillar parts
980B, 988
Rating:
Alternative (cross code) number:
CA5J4032
5J-4032
5J4032
CA5J4032
5J-4032
5J4032
Weight: 36 pounds 16 kg.
WHEEL LOADER,
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual for the correct draining and filling procedure.
Illustration 1 g03165716
Disconnect hoses (2).
Remove bolts (3) and expansion tank (1). Installation Procedure
Install expansion tank (1) in the reverse order of removal.
Tighten bolts (3) to a torque of 15 3 N m (133 27 lb in).
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual for the correct draining and filling procedure.
Illustration 1 g03165716
Disconnect hoses (2).
Remove bolts (3) and expansion tank (1). Installation Procedure
Install expansion tank (1) in the reverse order of removal.
Tighten bolts (3) to a torque of 15 3 N m (133 27 lb in).
Caterpillar parts catalog:
Parts body Caterpillar catalog:
7M9083
BODY
769, 824, 834, 988
769, 824, 834, 988
4J6646
BODY GROUP
834, 988
834, 988
1S1634
BODY
769, 988
769, 988
2S1442
BODY ASSEM.
824B
824B
1S2466
BODY ASSEM.
824B, 988
824B, 988