BODY-VALVE 5J6579 - Caterpillar

Removal Procedure
Illustration 1 g06100962
Remove bolts (1) and (2).
Disconnect harness assembly (3). Remove sensor assembly (4).Installation Procedure
Install sensor assembly (4) in the reverse order of removal.
Fit lever and potentiometer with bolts (2) temporarily. Rotate the lever so that the mounting part may come to lever mounting bracket on the fore-boom.
If the lever touches the stopper of potentiometer and does not rotate, remove bolts (2) of potentiometer and lever once. Mount inversely and readjust.Note: Forcible rotation of lever will result in broken potentiometer.
After confirming the lever rotates smoothly and the lever mounting part comes to the lever mounting bracket on the fore-boom, tighten bolts (2).