BODY 5S0908 - Caterpillar

Removal Procedure
Illustration 1 g00580960
Lift rubber boot (1) over the handle. Remove cover (2) .
Illustration 2 g00580970
Remove screws (3) .
Illustration 3 g00580996
Remove screw (4) .Note: Position the seat to the rear in order to access screw (4).
Illustration 4 g00580997
Remove bolts (5) .
Illustration 5 g00586342
Position cover (7) out of the way. Disconnect harness assembly (6). Position rubber boot (8) and harness assembly (6) out of the way. Note: The mount bolts are under rubber boot (8) .Note: Mark the location of harness assembly (6) for installation purposes.
Illustration 6 g00586348
Note: The joystick handle and the rubber boot were removed for photographic purposes. The handle will be removed with joystick control (10) .
Disconnect harness assembly (9). Remove bolts (11) and the washers. Remove joystick control (10) from the right console.Installation procedure
Illustration 7 g00586348
Note: The joystick handle and the rubber boot were removed for photographic purposes. The handle will be installed with joystick control (10) .
Install joystick control (10) to the right console. Install the washers and bolts (11). Connect harness assembly (9) .
Illustration 8 g00586342
Reposition rubber boot (8). Connect harness assembly (6). Position cover (7) over the joystick control.
Illustration 9 g00580997
Install bolts (5) .Note: Position the seat to the rear in order to access screw (4).
Illustration 10 g00580996
Install screw (4) .
Illustration 11 g00580970
Install screws (3) .
Illustration 12 g00580960
Install cover (2). Reposition rubber boot (1) .