BODY 6P3553 - Caterpillar

Removal Procedure
Table 1
Required Tooling
Tool Part Number Part Description Qty
A - LOCTITE C5-A Copper Anti-Seize 1
B 207-1601 Rubber Lubricant 1
C 337-7965 LOCTITE Nickel Anti-Seize Lubricant 1 Start By:
Remove exhaust cooler (NRS).
Remove venturi tube.
Illustration 1 g06078160
Remove bolts (1), bolt (3), bolts (4), bolts (5), tube assembly (2), and the O-ring seals.
Illustration 2 g06078249
Remove bolts (6), bolts (8), tube assembly (7), and the O-ring seals.
Illustration 3 g06078275
Remove bolts (9) and water manifold assemblies (10).
Illustration 4 g06078741
Remove bolts (11) and brackets (12).
Illustration 5 g06078758
Remove heat shield (13).
Illustration 6 g06078840
Remove bolts (15) and bracket (14).
Illustration 7 g06078894
Remove exhaust shield (16).
Illustration 8 g06078908
Remove band clamps (18) and bellow assemblies (17).Note: Bellows and band clamps are one use only. Discard and use new ones when reassembling.
Illustration 9 g06078923
Remove bolts (20), bolts (21), and exhaust manifold (19).
Illustration 10 g06078938
Remove bolts (22), bolts (24), and elbows (23).
Illustration 11 g06078964
Remove bolts (25).
Illustration 12 g06078973
Remove bolts (26).
Illustration 13 g06079293
Use a suitable lifting device to remove exhaust manifold as