7G3204 BODY AS-OIL PUMP Caterpillar parts
926, IT28, IT28B
Rating:
Alternative (cross code) number:
CA7G3204
7G-3204
7G3204
CA7G3204
7G-3204
7G3204
Weight: 3 pounds 1 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
Number on catalog scheme:
3
For full view, you need register
Information:
Visconic Damper
The visconic damper has a weight that is located inside a fluid filled case. The weight moves in the case in order to limit torsional vibration.Inspect the damper for evidence of fluid leaks. If a fluid leak is found, determine the type of fluid. The fluid in the damper is silicone. Silicone has the following characteristics: transparent, viscous, smooth and adhering.If the fluid leak is oil, inspect the crankshaft seals for leaks. If a leak is observed, replace the crankshaft seals.Inspect the damper and repair or replace the damper for any of the following reasons:
The damper is dented, cracked, or leaking.
The paint on the damper is discolored from heat.
The engine has had a failure because of a broken crankshaft.
Analysis of the oil has revealed that the front main bearing is badly worn.
There is a large amount of gear train wear that is not caused by a lack of oil.Refer to the Disassembly and Assembly Manual, "Vibration Damper and Pulley - Remove and Install" or consult your Cat dealer for information about damper replacement.
The visconic damper has a weight that is located inside a fluid filled case. The weight moves in the case in order to limit torsional vibration.Inspect the damper for evidence of fluid leaks. If a fluid leak is found, determine the type of fluid. The fluid in the damper is silicone. Silicone has the following characteristics: transparent, viscous, smooth and adhering.If the fluid leak is oil, inspect the crankshaft seals for leaks. If a leak is observed, replace the crankshaft seals.Inspect the damper and repair or replace the damper for any of the following reasons:
The damper is dented, cracked, or leaking.
The paint on the damper is discolored from heat.
The engine has had a failure because of a broken crankshaft.
Analysis of the oil has revealed that the front main bearing is badly worn.
There is a large amount of gear train wear that is not caused by a lack of oil.Refer to the Disassembly and Assembly Manual, "Vibration Damper and Pulley - Remove and Install" or consult your Cat dealer for information about damper replacement.
Caterpillar parts catalog:
Parts body Caterpillar catalog:
120G, 12G, 130G, 140B, 140G, 14G, 160G, 16G, 225, 235, 235B, 245, 578, 589, 613C, 615C, 621B, 621E, 621R, 623E, 627E, 631C, 631E, 633E, 637D, 637E, 651E, 657E, 769, 772, 773B, 776C, 785, 789, 815B, 82...
16, 173B, 518C, 528, 528B, 530B, 561H, 561M, 613, 613B, 613C, 613C II, 621, 650B, 666, 916, 920, 926, D7G, FB518, IT18, IT18B, IT28, IT28B
815B, 826C, 926, 936, 950B, 966D, 980C, 980F, CS-643
9T1247
BODY AS
814B, 815B, 826C, 926, 936F, 980F, IT28
814B, 815B, 826C, 926, 936F, 980F, IT28
3K5656
BODY
926, 936F, 950, 950B, 950F, 950F II, 966D, 966F, 966F II, 970F, 980C, IT28
926, 936F, 950, 950B, 950F, 950F II, 966D, 966F, 966F II, 970F, 980C, IT28
4T6973
BODY
926, 936, 936F, G936, IT28, IT28B
926, 936, 936F, G936, IT28, IT28B
8P8762
BODY-VALVE
IT28
IT28
7G9565
BODY AS
814B, 815B, 826C, 834B, 836, 926, 936, 936F, 950B, 950B/950E, 950F, 950F II, 966D, 966F, 980C, 980F, 988B, AD30, D350E, D350E II, D35HP, D400, D400E, D44B, D550B, G936, IT28, IT28B, R1700 II
814B, 815B, 826C, 834B, 836, 926, 936, 936F, 950B, 950B/950E, 950F, 950F II, 966D, 966F, 980C, 980F, 988B, AD30, D350E, D350E II, D35HP, D400, D400E, D44B, D550B, G936, IT28, IT28B, R1700 II
173B, 916, 926, D7F, D7G, IT18, IT18B, IT28, IT28B
D7G, IT12, IT18, IT28
9T1084
BODY AS
926, 936, 936F
926, 936, 936F
9V6313
BODY
916, 926, IT18B, IT28B
916, 926, IT18B, IT28B
2H4292
BODY
630A
630A
9T1084
BODY AS
926, 936, 936F
926, 936, 936F
D7G, IT12, IT18, IT28
9V3155
BODY
916
916
4T7936
BODY
508, 916, IT18
508, 916, IT18
IT12B
6Y4999
BODY AS
IT12B
IT12B
9T6838
BODY AS
916, IT18B
916, IT18B
9T4824
BODY AS
637E
637E
9T5736
BODY AS
637E
637E
9T4827
BODY AS
637E
637E