BODY 7S8569 - Caterpillar

Illustration 1 g00395819
OFF (1) - Insert the engine start switch key only from the OFF position and remove the engine start switch key only from the OFF position. In the OFF position, there is no power to most electrical circuits in the cab. The cab lights, panel lights, tail lights, and the fuel gauge light are operational even when the engine start switch is in the OFF position. Turn the engine start switch key to the OFF position in order to stop the engine.
ON (2) - Turn the engine start switch key clockwise to the ON position in order to activate all of the cab circuits. If equipped, the secondary steering motor will operate for three seconds when the engine start switch key is turned from the OFF position to the ON position.
START (3) - Turn the engine start switch key clockwise to the START position in order to crank the engine. Release the engine start switch key after the engine starts and the engine start switch key returns to the ON position. Note: If the engine fails to start, the engine start switch key must be returned to the OFF position in order to attempt to start the engine again.