BODY 8J2010 - Caterpillar

Illustration 1 g03716182
Boom cylinders shown with flats machined on both sides of the cylinder headsAdaptable To: The machined flats on the sides of the boom cylinder heads, and the new 171-9455 Screws are effective in production with the machines listed in Table 1.Installation of the new 171-9455 Screws is adaptable to the machines listed in Table 1. Refer to the rework procedure below if your machine requires additional clearance.
Table 1
Adaptability and Effectivity of the Improved Clearance Between the Boom Cylinder Head and the Cab Side Window Retainer Bolts    
Sales Model    Adaptability    Effectivity    
325D     S/N:C8L1-1630     S/N:C8L1631-UP    
568     S/N:BRB1-326     S/N:BRB327-UP    Rework Procedure
Table 2
Required Parts List for Field Rework    
Qty    New Part Number    New Part Name    
2     171-9455     Screw    
Illustration 2 g03716224
(a) Bolt (existing) (b) Washer (existing)
Remove two existing bolts (a) and two existing washers (b) located at the lower right-hand corner cab side window retainer. Refer to Illustration 2.
Chamfer the two bolt holes in the cab side window retainer. Chamfering the holes will allow the screw heads of the two new 171-9455 Screws to install flush with the outside surface of the window retainer.
Install two new 171-9455 Screws. Tighten the screws to a torque of 28 7 N m (248 62 lb in).