BODY 9G9431 - Caterpillar

Product Identification Number
The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.Cat products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers.For quick reference, record the identification numbers in the spaces that are provided below the illustration.
Illustration 1 g02236693
This plate is located on the left side of the front loader frame.Machine PIN ____________________Year of Manufacture ____________________This plate is located on the transfer gear case.Transmission Serial Number ____________________Certification Plate (CE)
Note: This plate is on machines that are used in the European Union.The certification plate (CE) verifies conformance to all of the requirements that were established by a country or by a group of countries. The product is tested by a testing group in order to verify conformance.This plate is located on the left side of the front frame close to the product identification plate.PIN ____________________Model ____________________Power (kW) ____________________Weight (kg) ____________________Engine Serial Number
Illustration 2 g00766631
This plate is located on the side cover of the engine toward the rear of the engine.Engine Serial Number ____________________Certification
ROPS/FOPS Plate
These messages are located on the front post on the left side in the cab.
Illustration 3 g00902324
Illustration 4 g02722091
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. This will void the certification. Consult your Cat dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Sound
Illustration 5 g02722124
A typical example of this film is shown. Your machine may have a different value.If equipped, the certification film is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".Machine Security System (If Equipped)
This message is located on the control group for the machine security system. The control group is located in the engine compartment.
Illustration 6 g00995393
Consult your Cat dealer with any questions that concern the operation of the MSS in a specific country.