BODY ASSEM. 9S0665 - Caterpillar

Illustration 1 g03058037
Right side view of engine
Table 1
Specification for 360-4240
Item Qty Part Specification Description
1 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 85.0 to 100.0 N (19.0 to 22.4 lb).
Free length after test is 112.8 mm (4.44 inch).
2 2 7N-7697 Plunger Cooling jet sequence valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
Cooling jet sequence valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
3 3 275-2604 Engine Oil Filter Screw the filter element onto the mounting base until the sealing surface contacts the base. Then tighten the filter element for an additional one full turn.
4 3 109-2332 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
5 1 228-7097 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
6 3 7G-6713 Spring Length under test force is 57.2 mm (2.25 inch).
Test force is 109 5 N (25 1 lb).
Free length after test is 99.7 mm (3.93 inch).
7 3 1P-1367 Plunger Bypass valve must start to open at a pressure difference of 203 20 kPa (29 3 psi).
The plunger must move freely in the bore.
8 2 0S-1594 Bolt Torque to 47 9 N m (35 7 lb ft).
9 2 0S-1571 Bolt Torque to 47 9 N m (35 7 lb ft).
Illustration 2 g03058038
front view of engine
Table 2
Item Qty Part Specification Description
10 1 6V-4589 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.