BODY AS-OIL PUMP 9U9539 - Caterpillar

Connection Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-9758     Jack Stand     1    
B     1U-9759     Jack Stand     2    
C     138-7576     Link Bracket     2    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00751560
Note: Apply a small amount of 4C-5598 Compound to the pilot shaft on torque converter (4) .Note: Clean the threads in torque converter (4) prior to assembly.
Use six bolts (5) in order to install plate (7) and plate (6) on torque converter (4). The torque for six bolts (5) is 55 5 N m (40 3 lb ft).
Illustration 2 g00751500
Use eight bolts (3) in order to install torque converter (4) .
Illustration 3 g00751498
Use a suitable lifting device and tooling (C) in order to place the transmission. The weight of the transmission is 227 kg (500 lb).
Install eleven bolts (1) and two bolts (2) .
Illustration 4 g00751497
Use a suitable lifting device in order to remove the engine and the transmission from tooling (A) and (B). The weight of the engine and the transmission is 680 kg (1500 lb).End By: Install the engine and the transmission. Refer to Disassembly and Assembly, "Engine and Transmission - Install".