BOGIE GP-FRONT 3810718 - Caterpillar

3810718 BOGIE GP-FRONT Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3810718
381-0718
3810718

Buy BOGIE GP-FRONT 3810718 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:

Caterpillar 3810718 Parts scheme BOGIE GP-FRONT

For full view, you need register

Information:

Illustration 12 g03730108
Illustration 12 shows mounting fit-up for 311-8143 Bracket (11) .
Illustration 13 g03730115
(27) 397-1275 Bracket (28) 8T-4192 Bolt
Secure 160-8708 Bracket As (7) to 397-1275 Bracket (27) with existing 8T-4192 Bolt (28) and 5P-1076 Hard Washer (15). Secure 204-8000 Cable Tie Mounting (8) to 160-8708 Bracket As (7) with 8T-4136 Bolt (9) and 8T-4121 Hard Washer (10). Secure 374-6425 Wiring Harness (5) with 7K-1181 Cable Strap (6) .
Illustration 14 g03730130
(29) 384-3356 Rear Harness As (30) 397-1390 Baffle As
Secure 374-6425 Wiring Harness (5) to 384-3356 Rear Harness As (29) with 7K-1181 Cable Strap (6). The 374-6425 Wiring Harness (5) to follow 384-3356 Rear Harness As (29) through 397-1390 Baffle As (30) .
Illustration 15 g03730138
Harness runs behind 397-1379 Door As (33) and 397-1296 Radiator Guard As (32) . (31) 381-5535 Radiator Guard Gp (32) 397-1296 Radiator Guard As (33) 397-1379 Door As
Illustration 16 g03730610
Route 374-6425 Wiring Harness (5) along 384-3356 Rear Harness As (29), securing with 7K-1181 Cable Strap (6) .
Illustration 17 g03730619
Remove 428-6688 Plate (1) to access the harness connection.
Illustration 18 g03730612
Harness connection located behind 428-6688 Plate (1) (34) 384-3343 Chassis Harness As (35) 155-2273 Connector Plug As (CH-C16) (36) 8T-4935 Weld Boss (37) 3E-3382 Connector Receptacle As (HC-C1)
Secure 130-5300 Clip (4) using existing 8T-4136 Bolt (9) and 8T-4121 Hard Washer (10). Connect 3E-3382 Connector Receptacle As (HC-C1) (37) in 384-3356 Rear Harness As (29) to 155-2273 Connector Plug As (CH-C16) (35) in 384-3343 Chassis Harness As (34) .After mounting and making harness connections, set the angle and azimuth as listed in Table 2.Once the hardware installation is completed, software supporting camera and radars must be installed. Refer to SIS Web for the latest software. The latest software will be listed in the Object Detection software Service Magazine for the Caterpillar Touch Screen Display. The Object Detection serial number prefixes are DTK and DTJ.
Table 2
Machine Angle Azimuth
824K/825K 0 0