BOGIE AS-MIDDLE 7G3903 - Caterpillar

Table 1
OPERATION    
Warning Category     Warning Indications (1)     "Operator Action Required"     "Possible Result" (2)    
Alert Indicator Flashes Action Lamp Flashes     Action Alarm Sounds    
1     X             No immediate action is required. The system needs attention soon.     No damage will occur to the machine. Minor reductions in machine performance may occur.    
2     X     X         Change machine operation or perform maintenance to the system.     Severe damage to components can occur.    
2-S     X     X     X (3)     Immediately change the machine operation.     Severe damage to components can occur.    
3     X     X     X (4)     Immediately perform a safe engine shutdown.     Injury to the operator or severe damage to components can occur.    
( 1 ) The active warning indications are marked with an X.
( 2 ) This is the possible result if the operator does not take action.
( 3 ) The alarm is ON continuously.
( 4 ) The alarm is ON intermittently.Recommended action to be taken by the machine operator in response to the different warning levels:Level 1 - This warning level will cause the involved system alert indicator to illuminate. A level 1 warning will indicate that the operator should be aware of a condition of one or more of the machine systems.Level 2 - This warning level will indicate that the operation of the machine should be changed or maintenance should be performed to the machine. Possible damage to components on the machine may occur.Level 2-S - This warning level will indicate that the operation of the machine should be changed or maintenance should be performed to the machine. Possible severe damage to components on the machine may occur.Level 3 - This warning level will indicate that the machine needs to have an immediate, safe emergency engine shutdown. Possible injury to the operator or severe damage to components may occur.
Table 2
Event Codes for the Power Train ECM    
EID    Warning
Level    Description    Activation    
49     2s     Coasting in Neutral     The event is logged when the machine is in Neutral, the ground speed is above
10 km/h (6 mph) for longer than five seconds, and the engine speed is below 1300 rpm.    
234     1     Auto Lube Level Lo     The event is logged when the autolube grease level is low.    
234     2     Auto Lube Level Lo – Add Lube     The event is logged when the autolube grease level is low.    
333     1     Auto Lube Pressure Hi     The event is logged when the autolube pressure is high.    
333     2     Auto Lube Pressure Hi - Call Shop     The event is logged when the autolube pressure is high.    
334     1     Auto Lube Pressure Lo     The event is logged when the autolube system is not building enough pressure to