AVSPARE.COM
parts catalog

BOLT 0003320 - Caterpillar



0003320 BOLT Caterpillar parts BOLT
Rating:
16
Alternative (cross code) number:
CA0003320
000-3320
0003320
Caterpillar 0003320 BOLT

Buy BOLT 0003320 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Always replace the secondary filter element. Never attempt to reuse it by cleaning.The secondary filter element should be replaced at the time the primary element is serviced for the third time.The secondary filter element should also be replaced if the yellow piston in the filter element indicator enters the red zone after installation of a clean primary element, or if the exhaust smoke is still black.
Open the engine access door on the top of the engine compartment.
Remove the air cleaner housing cover and remove the primary filter element.
Illustration 1 g00038606
Remove the secondary filter element.
Cover the air inlet opening. Clean the inside of the air cleaner housing.
Inspect the gasket between the air inlet pipe and the air cleaner housing. Replace the gasket if the gasket is damaged.
Uncover the air inlet opening. Install a new secondary element.
Install the primary element and the air cleaner housing cover. Hand tighten the bolt in order to secure the air cleaner housing cover.
Illustration 2 g01009919
Reset the filter element indicator.
Close the engine access door.


Parts bolt Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.