BOLT 0179814 - Caterpillar

1. Lower the scraper and put blocks in front and behind the wheels. 2. Put tooling (A) in position and lift the machine as shown.
Machine can fall off of hydraulic jack. Put blocks under the differential housing for support.
3. Remove all but one of the nuts that hold the rim to the wheel assembly.4. Loosen the last nut approximately .125 in. (3.18 mm).
The tire can fall off of the lift truck. Make sure the tire is fastened to the lift truck.
5. Fasten the tire to a lift truck with a chain as shown.6. Remove the last nut that holds the tire in position. Remove the rim and tire. Weight of the rim and tire is 925 lb. (421 kg).Install Tractor Rim And Tire
1. Fasten the tire to a lift truck with a chain as shown.
Make sure tire is fastened to the lift truck.
2. Put the rim and tire in position on the machine.3. Install four nuts that hold the rim to the wheel assembly.4. Remove the chain and lift truck. 5. Install the remainder of nuts (1) that hold the rim and tire to the wheel assembly. Tighten the nuts to a torque of 375 25 lb.ft. (510 35 N m).6. Remove the support blocks from under the differential housing.7. Lower the machine to the ground. Remove tooling (A) from under the machine.