BOLT & VALVE A 0634361 - Caterpillar

Illustration 1 g00702473
Locally manufacture two stops to the following dimensions. Use a suitable mild steel.
Table 1
Dimensions for Crankcase Guard Stop.    
A     15 mm (0.6 inch)    
B    
100 2 mm (3.9 0.1 inch)    
Attach the welding ground wire as near to the weld as practical.
Illustration 2 g00702475
Illustration 3 g00702645
Weld the two stops (1) into position on the crankcase guard (2). The positions of the stops are shown above in illustrations 2 and 3. Refer to table 2 for dimension (C) and dimension (D).
Table 2
Dimensions for Positioning of Crankcase Guard Stops.    
C    
335 2 mm (13.2 0.1 inch)    
D    
5 2 mm (0.2 0.08 inch)    
Once the welded area has cooled clean the area and paint.
Replace the crankcase guard on the machine.