BOLT 0869061 - Caterpillar

Vibratory Tachometer - The meter indicates the vibrations per minute of the vibratory drum.Vibratory System Indicator
Illustration 2 g03420760
(2) Vibratory system indicator
Vibratory System Indicator - The indicator for the vibratory system will illuminate when the vibratory system is activated. When the vibratory system is in automatic mode, the indicator light will remain on. When the vibratory system is in manual mode, the indicator will only turn on when the compactor is vibrating.On/Off Trigger for the Vibratory System
Illustration 3 g03420762
(3) Propel lever
(4) On/Off trigger for the vibratory system
The trigger on the propel lever controls the operation of the vibration system.ON - In order to turn on the vibration system, press the trigger.OFF - In order to stop the vibration system, press the trigger again.Note: The vibratory system will not operate when the machine is in the NEUTRAL position.Note: Place the throttle control in the FAST position before you operate the vibratory system.Note: The indicator for the vibratory system will be illuminated when the vibratory system is in the ON position.Dual Amplitude Control Switch (5)
Illustration 4 g03420754
(5) Dual amplitude control switch
(6) Vibratory mode control
(7) Vibratory auto/manual control knob
Dual Amplitude Control Switch - The dual amplitude control switch sets the vibratory amplitude of the drums. Using the low amplitude setting will result in a high frequency. Using the high amplitude setting will result in a low frequency.Note: If your machine is equipped with a Versa-Vibe system, the propel speed will change when the vibration frequency is changed. This change allows the machine to maintain the impact spacing.
Low - Move the switch right in order to select low amplitude. The low amplitude setting provides a high frequency.
High - Move the switch left in order to select high amplitude. The high amplitude setting provides a low frequency.Vibratory Mode Control (6)
Front Drum - Move the switch right in order to activate the vibratory system for the front drum.
Front and Rear Drum - Move the switch to the middle position in order to activate the vibratory system for the front drum and the rear drum.
Rear Drum - Move the switch left in order to activate the vibratory system for the rear drum.Vibratory Auto/Manual Control Knob (7)
Automatic - Turn the vibratory control knob clockwise past the symbol of the tortoise in order to activate the automatic vibratory functionality. Rotate the vibratory control knob clockwise in order to increase the activation speed for the vibratory system. Rotate the vibratory control knob counterclockwise in order to decrease the activation speed for the vibratory system.
Manual - Turn the vibratory control knob to the full counterclockwise position in order to activate the manual vibratory functionality. The vibratory system may be activated at any time when the machine is being propelled. In the manual mode, the vibratory shafts will rotate forward only.Note: The vibratory system will not activate while the propel system is in the NEUTRAL position.