BOLT,SHOE 0958845 - Caterpillar

Illustration 1 g00826522
(1) Torque for bolt with lubricant on the threads ... 3600 400 N m (2700 300 lb ft) (2) Two inserts must not extend beyond the face of the piston. (3) Bore of cylinder ... 101.22 + 0 − 0.33 mm (4.0 + 0 − 0.013 inch) (4) Bore of head ... 63.83 0.03 mm (2.51 0.0012 inch) (5) Apply 4C-4032 Bearing Mount Compound to the wiper seal groove prior to assembly. (6) Diameter of rod ... 63.450 0.038 mm (2.5 0.0015 inch) (7) Use shims, as required. (8) Apply clean grease to the threads on the head. Torque for head ... 600 130 N m (440 100 lb ft) (9) Critical dimensions Stroke 129-1908 Lift Cylinder ... 1385 mm (54.53 inch) Stroke 129-4259 Lift Cylinder ... 1437 mm (56.57 inch) Distance from pin to trunnion on fully retracted 129-1908 Lift Cylinder ... 905 mm (35.63 inch) Distance from pin to trunnion on fully retracted 129-4259 Lift Cylinder ... 1016 mm (40.00 inch) (10) Lubricate the lips of the seals with the lubricant that is being sealed. (11) Depth of two spacers below the piston face ... 39.5 0.3 mm (1.555 0.012 inch)