AVSPARE.COM
parts catalog

BOLT 0T0708 - Caterpillar


0T0708 BOLT Caterpillar parts 980C
Rating:
83
Alternative (cross code) number:
CA0T0708
0T-0708
0T0708
Caterpillar 0T0708 BOLT

Buy BOLT 0T0708 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 0T0708:

WHEEL LOADER  980C   Caterpillar
Number on catalog scheme: 24
  For full view, you need register

Information:


Illustration 1 g03442137
Typical example
Illustration 2 g01356356
Alignment of the bearing shell
The mating surfaces of the connecting rod are produced by hydraulically fracturing the forged connecting rod. (1) Tighten the setscrews for the connecting rod to the following torque. ... 40 N m (30 lb ft)Tighten the setscrews for the connecting rod for an additional 120 degrees. The setscrews for the connecting rod (1) must be replaced after this procedure.Note: Always tighten the connecting rod cap to the connecting rod, when the assembly is out of the engine. Tighten the assembly to the following torque 15 N m (133 lb in). (A) The bearing shell for the connecting rod must be aligned equally from both ends of the connecting rod. (2) The bearing shell for the connecting rod
Table 1
Bearing Width for the Connecting Rod 31.47 mm (1.2390 inch) to 31.73 mm (1.2492 inch)
Bearing Width for the Connecting Rod Cap 31.47 mm (1.2390 inch) to 31.73 mm (1.2492 inch)
Thickness of Connecting Rod Bearing at the Center 1.995 mm (0.0785 inch) to 2.002 mm (0.0788 inch)
Thickness of Connecting Rod Bearing for the Cap at the Center 1.995 mm (0.0785 inch) to 2.002 mm (0.0788 inch)
Bearing Clearance 0.031 mm (0.0012 inch) to 0.078 mm (0.0031 inch)
Illustration 3 g03442182
Typical example
(B) Diameter of the bore for the piston pin ... 43.01 to 43.04 mm (1.693 to 1.694 inch) (C) Distance between bearing centers ... 219.05 to 219.10 mm (8.624 to 8.626 inch) (D) Diameter for the bore for the connecting rod bearing ... 72.045 to 72.058 mm (2.8364 to 2.8369 inch)
Illustration 4 g01356360
Typical example
Connecting rods are color coded. The color code is a reference for the length (Y) of the connecting rod. Refer to table 1 for the different lengths of connecting rods.
Table 2
Length Grades for Connecting Rods
Grade Letter Color Code Length (Y)
R Red 163.310 mm (6.4295 inch) to 163.343 mm (6.4308 inch)
O Orange 163.264 mm (6.4277 inch) to 163.297 mm (6.4290 inch)
W White 163.219 mm (6.4259 inch) to 163.252 mm (6.4272 inch)
G Green 163.173 mm (6.4241 inch) to 163.206 mm (6.4254 inch)
P Purple 163.127 mm (6.4223 inch) to 163.160 mm (6.4236 inch)
B Blue 163.081 mm (6.4205 inch) to 163.114 mm (6.4218 inch)

Caterpillar parts catalog:

Caterpillar parts catalog
980C WHEEL LOADER 13B00300-UP (MACHINE) POWERED BY 3406 ENGINE


Parts bolt Caterpillar catalog:

8T9079 BOLT-PLOW
924F, 938G, 938G II, 950 GC, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 950K, 953C, 953D, 960F, 962G, 962G II, 962H, 962K, 963B, 963C, 963D, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 9...
1D4649 BOLT
784C, 785, 785C, 785D, 789B, 793, 793B, 793C, 844, 844H, 844K, 953C, 966F, 980C, CP-68B, CP-74B, CS-56B, CS-66B, CS-68B, CS-74B, D8L, D9N
1K6978 BOLT
572G, 621, 623, 631C, 641, 641B, 650B, 651, 657, 657B, 666, 980C, 988B, D44B, D6C, D6D, D6E, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2
1J3527 BOLT-PLOW
24H, 24M, 336D, 615, 623B, 950B, 950F, 960F, 963, 963C, 980B, 980C, 980F, 980F II, 992, 992K, 993K, 9A, 9S, D8R, D8R II
1D4644 BOLT
8 SR, 824C, 834, 930, 950, 953B, 980, 980B, 980C, 980F, 980F II, 988, 9A, 9S, D10, D11N, D11R, D11T, D250B, D25D, D300B, D300D, D350C, D35C, D35HP, D400, D40D, D5, D5B, D8L, D9G, D9H, SS-250
8S4738 BOLT
824C, 973, 980C, 980F, 980F II, AD45B, AD55, AD55B, AD60, CS-551, R1600, R1600G, R1600H, R1700G, R2900, R2900G
7X0435 BOLT
980C, 980F, 980F II, D7G, D7G2, D7H, D7R, D7R II, D8N
5K5922 BOLT
16G, 16H, 16H NA, 518C, 528, 528B, 530B, 613C, 613C II, 621, 621B, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 814, 814B, 815B, 824C, 826C, 936, 936F, 950, 950B, 950F, 950F II, 966C, 966D, 9...
9X8291 BOLT-FLAT HEAD
834B, 836, 936F, 980C, 988B, 988F, 988F II, 992C, 992D, AD30, AD40, AD45, AD45B, AD55, AD55B, AD60, AE40, G936, IT28B, R1300, R1600, R1600G, R1600H, R1700G, R2900, R2900G, R3000H
6J6721 BOLT
14E, 814B, 814F, 815B, 815F, 816F, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 966D, 966F, 966F II, 970F...
9V4319 BOLT
824C, 825C, 826C, 980C, 980F, 980F II, 988B, R1600, R1700 II
8T1901 BOLT
814B, 815B, 816B, 824C, 966D, 966F, 966G, 980C, 980F, 980F II, D25D, D350E, D35C, D35HP, D400E, D40D, D44B, D550B, R1700 II
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.