1022563 BOLT-SOCKET HEAD Caterpillar parts
336E H, 336E LH, 350, W330B
Rating:
Alternative (cross code) number:
CA1022563
102-2563
1022563
CA1022563
102-2563
1022563
Weight: 1 pounds 0 kg.
Information:
DR TYPE
HEX
GRIP LENGTH
196
mm
HEAD DIAMETER
30
mm
HEAD HEIGHT
20
mm
HEAD STYLE
SHD
LENGTH
240
mm
MATERIAL
Steel RC 35 Min
SOCKET SIZE
17
mm
THREAD SIZE
M20X2.5
EXCAVATOR, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Set of 4 PU Bush 1-02-2563 Rr Susp. Swaybar link Land Cruiser LX570 ID 10.5 mm
Durable Parts Flexibility across hardness range || Resistance to wear and tear || Wide temperature range || Resistant to oils, acids, solvents, and weather conditions || Alternatively, you can search for it by application or OEM on our website
Durable Parts Flexibility across hardness range || Resistance to wear and tear || Wide temperature range || Resistant to oils, acids, solvents, and weather conditions || Alternatively, you can search for it by application or OEM on our website
$4.15
26 Jan 2019
4 Hundredths Pounds
CRT: CRT
PU Bushing 1-02-2563 Rear Susp. Swaybar link Land Cruiser,Lx570, ID 10,5 mm
Manufactured from the best durable polyurethane-based elastomer which increase the service life of the parts, serving your car two-tree times longer than rubber analogues. Siberian Bushing spareparts were tested in the most severe road and weather conditions in the world - in Siberia. || Siberian Bushing uses only high quality polyurethane compounds. Unlike the cheaper and obsolete rubber replacement parts, our parts withstand widest range of operating temperatures, stay flexible and durable even under hard loads and in extreme driving conditions. || All mount sizes (inner sleeve I.D. etc.) match the original ones. If not specified, the default polyurethane hardness is 65 (Shore A) that is equivalent to original rubber material. This provides safe and comfort driving, meantime increasing the responsiveness of your car. || LAND CRUISER, LX570, || Ozone, oil and solvents resistant. Wear-out, tear-off and cuts resistant.
Manufactured from the best durable polyurethane-based elastomer which increase the service life of the parts, serving your car two-tree times longer than rubber analogues. Siberian Bushing spareparts were tested in the most severe road and weather conditions in the world - in Siberia. || Siberian Bushing uses only high quality polyurethane compounds. Unlike the cheaper and obsolete rubber replacement parts, our parts withstand widest range of operating temperatures, stay flexible and durable even under hard loads and in extreme driving conditions. || All mount sizes (inner sleeve I.D. etc.) match the original ones. If not specified, the default polyurethane hardness is 65 (Shore A) that is equivalent to original rubber material. This provides safe and comfort driving, meantime increasing the responsiveness of your car. || LAND CRUISER, LX570, || Ozone, oil and solvents resistant. Wear-out, tear-off and cuts resistant.
Number on catalog scheme:
10
For full view, you need register
Compatible equipment models: 1022563:
Information:
Probable Causes
Multiple starts or cold operation
Incorrect maintenance intervals
Dirt in engine oil
Incorrect oil
Contaminated oil
Leaks in air intake system
Dirt in fuel
Low oil pressureRecommended Actions
Multiple Starts or Cold Operation
Frequent starting and stopping of the engine can cause early wear. Also, operation of the engine for short periods of time in cold conditions can cause early wear.Incorrect Maintenance Intervals
If the engine is not correctly maintained, early wear will occur.Make sure that the engine is maintained at the correct maintenance intervals. Refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule".Dirt in Engine Oil
Drain the oil from the crankcase and refill the crankcase with clean engine oil. Install new engine oil filters. Refer to the Operation and Maintenance Manual for more information. Incorrect Oil
Check that the engine is filled with oil of the correct specification. Refer to the Operation and Maintenance Manual, "Refill Capacities and Recommendations".
If necessary, drain the engine oil system and refill the engine oil system. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change". Contaminated Oil
Check an oil sample for contamination with fuel. If contamination is found, investigate the cause.Leaks in Air Intake System
A leak in the air intake system may allow unfiltered air into the engine. Inspect the air intake system for streaks which may indicate a leakage of unfiltered air. Inspect all of the gaskets and the connections. Repair any leaks. Refer to Systems Operation, Testing, and Adjusting, "Air Inlet and Exhaust System" for more information.Dirt in Fuel
Remove the fuel filters. Inspect the fuel filters for contamination. Install new fuel filters. Refer to the Operation and Maintenance Manual, "Fuel System Filter- Replace". Determine the cause of the contamination.
Check the diesel fuel for contamination. Refer to Systems Operation, Testing, and Adjusting, "Fuel Quality - Test". Low Oil Pressure
Refer to Troubleshooting, "Oil Pressure Is Low" for the testing procedure. Repair any identified faults.
Multiple starts or cold operation
Incorrect maintenance intervals
Dirt in engine oil
Incorrect oil
Contaminated oil
Leaks in air intake system
Dirt in fuel
Low oil pressureRecommended Actions
Multiple Starts or Cold Operation
Frequent starting and stopping of the engine can cause early wear. Also, operation of the engine for short periods of time in cold conditions can cause early wear.Incorrect Maintenance Intervals
If the engine is not correctly maintained, early wear will occur.Make sure that the engine is maintained at the correct maintenance intervals. Refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule".Dirt in Engine Oil
Drain the oil from the crankcase and refill the crankcase with clean engine oil. Install new engine oil filters. Refer to the Operation and Maintenance Manual for more information. Incorrect Oil
Check that the engine is filled with oil of the correct specification. Refer to the Operation and Maintenance Manual, "Refill Capacities and Recommendations".
If necessary, drain the engine oil system and refill the engine oil system. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change". Contaminated Oil
Check an oil sample for contamination with fuel. If contamination is found, investigate the cause.Leaks in Air Intake System
A leak in the air intake system may allow unfiltered air into the engine. Inspect the air intake system for streaks which may indicate a leakage of unfiltered air. Inspect all of the gaskets and the connections. Repair any leaks. Refer to Systems Operation, Testing, and Adjusting, "Air Inlet and Exhaust System" for more information.Dirt in Fuel
Remove the fuel filters. Inspect the fuel filters for contamination. Install new fuel filters. Refer to the Operation and Maintenance Manual, "Fuel System Filter- Replace". Determine the cause of the contamination.
Check the diesel fuel for contamination. Refer to Systems Operation, Testing, and Adjusting, "Fuel Quality - Test". Low Oil Pressure
Refer to Troubleshooting, "Oil Pressure Is Low" for the testing procedure. Repair any identified faults.
Caterpillar parts catalog:
Parts bolt Caterpillar catalog:
6I6335
BOLT
350
350
1056730
BOLT
350
350
330B L, 345B II, 345B L, 345D, 345D L, 349D, 349D L, 349E, 350, 365B L, 375, 375 L, E300B, EL240B
1119909
BOLT
350, 375, 375 L
350, 375, 375 L
0995663
BOLT-SOCKET HEAD
330, 330 FM L, 330 L, 330B, 330B L, E300B, W330B
330, 330 FM L, 330 L, 330B, 330B L, E300B, W330B
7I0005
BOLT
350
350
1132116
BOLT
350
350
1152738
BOLT
350
350
345B II, 345B L, 350, 365B, 365B II, 365B L