BOLT 1232899 - Caterpillar

Illustration 22 g02717560
Remove retainers (37) and spring (38).
Illustration 23 g02717587
Remove plunger (39) , plunger spring (40) , sleeve (41) , springs (42) , and retainer (43).
Illustration 24 g02717620
Remove O-ring seals (44) and (45).
Illustration 25 g02717870
Remove bolts (46) and O-ring seal (47).
Illustration 26 g02717935
Remove differential piston housing (49). Remove port plate (48).
Illustration 27 g02717949
. Remove bolt (50).
Illustration 28 g02717961
Remove port plate dowel (51). Remove slide (52).
Illustration 29 g02718099
Install Tooling (C).
Illustration 30 g02718136
Illustration 31 g02718247
Remove retaining ring (53). Using a suitable brass punch and suitable hammer to remove shaft and piston assembly (54).
Loosen limiting screw (55) to remove shaft and piston assembly (54). Note: Record how many turns you loosened the limiting screw (54), for assembly purposes.
Illustration 32 g02718160
Remove backing ring (56).
Illustration 33 g02718166
Using Tooling (A) and a suitable hammer to remove shaft seal (58). Remove O-ring seal (57).
Illustration 34 g02718234
Raise temperature of shaft and piston assembly (54) to remove bolts (59).
Illustration 35 g02718279
Remove retaining ring (60).
Illustration 36 g02720205
Place shaft (61) in a suitable press to remove bearing cone (62) , plate (63) , and bearing cup (64).
Illustration 37 g02720214
Using Tooling (B) and a suitable press to remove bearing cone (65).