1608742 BOLT Caterpillar parts
120M, 12M, 302.5, 302.5C, 303.5, 304.5, 3126, 3126B, 3126E, 583T, 587T, 627G, 637D, 637E, 637G, 725C, 730C, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 938H, 980G II, C13, C15, C175-...
Rating:
Alternative (cross code) number:
CA1608742
160-8742
1608742
CA1608742
160-8742
1608742
Weight: 0.09 pounds 0 kg.
Information:
COATING/PLATING
Phosphate and Oil Coating
GRIP LENGTH
4.5
mm
HEAD HEIGHT
6.63
mm
HEX SIZE
16
mm
LENGTH
55
mm
MATERIAL
Steel - 1040 MPa Min Tensile Strength
THREAD SIZE
M10X1.5
ARTICULATED TRUCK, WHEEL TRACTOR,
Compatible equipment models: 1608742:
Number on catalog scheme:
5
For full view, you need register
Information:
Remove Crankshaft Front Seal And Wear Sleeve
Start By:a. remove crankshaft vibration damper and pulley
When replacement of the front seal is made, a replacement of the wear sleeve must also be made.
1. Remove the two bolts, washers, and clamp (1) that hold retainer (2) in position. Remove retainer (2) and the O-ring seal from the engine.2. Use tool (A) and a press to remove seal (3) from retainer (2).3. Put the O-ring seal and retainer (2) in position on the engine, and install the two bolts, washers, and clamp (1) to hold them. 4. Install tool (C) in the bore of retainer (2) as shown.5. Install tool (B) between tool (C) and the wear sleeve. Turn tool (B) with a wrench until the edge of the tool makes a flat place (crease) in the wear sleeve. Do this in two or more places until the wear sleeve is loose.6. Remove tool (C) and the wear sleeve by hand.Install Crankshaft Front Seal And Wear Sleeve
1. Install crankshaft front seal (1) and wear sleeve (2) with tool (A) as follows:a. Put clean engine oil on the seal lip of seal (1) and on the outside diameter of wear sleeve (2). Install seal (1) on wear sleeve (2) as shown.b. Use 6V1541 Quick Cure Primer to clean the outside diameter of crankshaft (3) and the inside diameter of wear sleeve (2).c. Put 9S3265 Retaining Compound on the outside diameter of crankshaft (3) and the inside diameter of wear sleeve (2). Make sure the lip of the seal is toward the engine and the outside diameter bevel of the wear sleeve is toward the outside of the engine.d. Put wear sleeve (2) with seal (1) on the front of the crankshaft as shown in illustration B20159P1. Install tool (A). Tighten the bolt in tool (A) until the inside surface of the installer in tooling (A) makes contact with the end of the crankshaft.End By:a. install crankshaft vibration damper and pulley
Start By:a. remove crankshaft vibration damper and pulley
When replacement of the front seal is made, a replacement of the wear sleeve must also be made.
1. Remove the two bolts, washers, and clamp (1) that hold retainer (2) in position. Remove retainer (2) and the O-ring seal from the engine.2. Use tool (A) and a press to remove seal (3) from retainer (2).3. Put the O-ring seal and retainer (2) in position on the engine, and install the two bolts, washers, and clamp (1) to hold them. 4. Install tool (C) in the bore of retainer (2) as shown.5. Install tool (B) between tool (C) and the wear sleeve. Turn tool (B) with a wrench until the edge of the tool makes a flat place (crease) in the wear sleeve. Do this in two or more places until the wear sleeve is loose.6. Remove tool (C) and the wear sleeve by hand.Install Crankshaft Front Seal And Wear Sleeve
1. Install crankshaft front seal (1) and wear sleeve (2) with tool (A) as follows:a. Put clean engine oil on the seal lip of seal (1) and on the outside diameter of wear sleeve (2). Install seal (1) on wear sleeve (2) as shown.b. Use 6V1541 Quick Cure Primer to clean the outside diameter of crankshaft (3) and the inside diameter of wear sleeve (2).c. Put 9S3265 Retaining Compound on the outside diameter of crankshaft (3) and the inside diameter of wear sleeve (2). Make sure the lip of the seal is toward the engine and the outside diameter bevel of the wear sleeve is toward the outside of the engine.d. Put wear sleeve (2) with seal (1) on the front of the crankshaft as shown in illustration B20159P1. Install tool (A). Tighten the bolt in tool (A) until the inside surface of the installer in tooling (A) makes contact with the end of the crankshaft.End By:a. install crankshaft vibration damper and pulley
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
120M, 120M 2, 12H NA, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H NA, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 160H NA, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H NA, 651, 784B, 784C, 785, 785B, 785C, 785D, 789, 78...
14E, 814B, 814F, 815B, 815F, 816F, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 966D, 966F, 966F II, 970F...
515, 525, 525B, 525C, 525D, 535B, 535C, 535D, 545, 545C, 545D, 555D, 793F AC, 795F AC, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834H, 836G, 836H, 854K, 950G, 950G II, 950H, 950K,...
1390, 2390, 2590, 390F L, 521, 521B, 522B, 541, 541 2, 551, 552, 552 2, 777F, 777G, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 834G, 834H, 834K, 986H, 988G, 988H, 988K
730, 730C, 740, 740B, 793, 793B, 793C, 793D, 988G, 988H, D400E II, D8R, D8T, M320
120M, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 844, 844H, 844K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, 990, 990 II, 990H, 990K, PM-465
120M, 12M, 14M, 16M, 345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 5080, 5090B, 5110B, 525B, 525C, 53...
390D, 390D L, 390F L, 5110B, 980G II, 980H, 980K, 988G, 988H, 988K, 990, 990 II, 990H, 990K, 992D, 992G, 992K, 993K
795F AC, 795F XQ, 797, 797B, 797F, 988K, 990 II, 990H, 990K, 992K, 994F, 994H, R2900G, R3000H
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 3...
120M, 120M 2, 12H, 12H ES, 12H NA, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H, 140H ES, 140H NA, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 160H, 160H ES, 160H NA, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 163H NA...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14G, 14H, 14H NA, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16G, 16H, 16H NA, 16M, 24H, 24M, 785B, 785C, 789B, 789C, 793B, 79...
2337489
BOLT
3054C, 3054E, AP-650B, AP-800D, C3.3, C4.4, CP-533E, CS-533E, CS-54, PS-360C, TH220B, TH330B, TH460B, TH560B, TH580B
3054C, 3054E, AP-650B, AP-800D, C3.3, C4.4, CP-533E, CS-533E, CS-54, PS-360C, TH220B, TH330B, TH460B, TH560B, TH580B
3349334
BOLT
3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 316E L, 318D2 L, 318E L, 414E, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 428D, 428E, 428F, 430D, 430E, 430F, ...
3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 316E L, 318D2 L, 318E L, 414E, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 428D, 428E, 428F, 430D, 430E, 430F, ...
416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 430D, 430E, 434E, 434F, 444E, 444F, 450E, 450F
414E, 416D, 416E, 420D, 420E, 424D, 430D, 430E, 434E, 434F, 444E, 444F, 450E, 450F, 725, 725C, 730, 730C, 735, 735B, 740, 740B
3406C, 3412C, 3512B, 3512C, 3516C, 3606, 3608, 3612, 3616, 3618, 420E, 430E, 432E, 434E, 442E, 444E, 450E, 450F, 561H, 725, 730, 735, 740, 770, 770G, 772, 772G, 773F, 775F, 777F, C18, CB-224C, D250E I...
621B, 621R, 623B, 627B, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
1997178
BOLT
G3606, G3606B, G3608, G3612, G3616, TH340B
G3606, G3606B, G3608, G3612, G3616, TH340B
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 213B, 214B, 224B, 2470C, 2570C, ...
TH220B, TH330B
TH220B, TH330B
1990643
BOLT
TH220B, TH460B, TH560B
TH220B, TH460B, TH560B
TH220B, TH330B, TH460B, TH560B