1696064 BOLT-SOCKET HEAD Caterpillar parts
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D, MP15, S305, S465, VHS-50, VT30, VT50
Rating:
Alternative (cross code) number:
CA1696064
169-6064
1696064
CA1696064
169-6064
1696064
Weight: 0.42 pounds 0 kg.
Information:
COATING/PLATING
Phosphate and Oil Coating
DR TYPE
HEX
GRIP LENGTH
7.5
mm
HEAD DIAMETER
30
mm
HEAD HEIGHT
20
mm
HEAD STYLE
SHD
LENGTH
55
mm
MATERIAL
Steel RC 35 Min
SOCKET SIZE
17
mm
THREAD SIZE
M20X2.5
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 1696064:
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02494796
Turn OFF the air supply. Release the air pressure in the system.
Disconnect the hose assembly from tee (1).
Disconnect the harness assemblies from air starting motor (2).
Attach a suitable lifting device to air starting motor (2). Remove bolts (3) and air starting motor (2) from the flywheel housing. The weight of air starting motor (2) is approximately 30 kg (66 lb).
Remove the gasket from the air starting motor. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install a new gasket on the air starting motor.
Illustration 2 g02494796
Attach a suitable lifting device to air starting motor (2). Position air starting motor (2) into the flywheel housing and install bolts (3). The weight of air starting motor (2) is approximately 30 kg (66 lb).
Connect the harness assemblies to air starting motor (2).
Connect the hose assembly to tee (1).
Turn ON the air supply.
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02494796
Turn OFF the air supply. Release the air pressure in the system.
Disconnect the hose assembly from tee (1).
Disconnect the harness assemblies from air starting motor (2).
Attach a suitable lifting device to air starting motor (2). Remove bolts (3) and air starting motor (2) from the flywheel housing. The weight of air starting motor (2) is approximately 30 kg (66 lb).
Remove the gasket from the air starting motor. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install a new gasket on the air starting motor.
Illustration 2 g02494796
Attach a suitable lifting device to air starting motor (2). Position air starting motor (2) into the flywheel housing and install bolts (3). The weight of air starting motor (2) is approximately 30 kg (66 lb).
Connect the harness assemblies to air starting motor (2).
Connect the hose assembly to tee (1).
Turn ON the air supply.
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
330D L, 336D, 336D L, 336D2, 336E, 336E H, 336E L, 336E LH, 336F L, 345C, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 374D L, 374F L, 385C, 385C FS, 385C L, 390D, 390D L, 568 FM LL, W345C M...
2384C, 2484C, 322 FM L, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 324D L, 330, 330 FM L, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D MH, 336D L, 336E L, 345B, 345B II, 345B I...
325D FM, 325D FM LL, 330D FM, 330D L, 330D MH, 345B II, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 365C L, 551, 552, 552 2, 568 FM LL
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 3...
320B, 320C, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 321C, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, ...
325C, 330, 330 FM L, 330B L, 330C L, 330D, 330D L, 336D L, 345B, 345C, 345C L, 345D, 349D L, 350, 350 L, OEMS, TK1051
16M, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325C, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 3...
320C, 325C, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 34...
330B L, 330C, 330C FM, 330C L, 330D FM, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 551, 552, OEMS, TK751, TK752
320D, 330C L, 330D L, 336D, 336D2, 336E, 336E H, 336E L, 336E LH, 336F L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 36...
330, 330 FM L, 330 L, 330B, 330B L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, E300B, M330D, W330B
325C, 330C L, 330D L
CTV15, GSH15, GSH15-60, GSH9, GSH9B, MP15, P115, P360, S305, S365B, S365C, S465, VHC-30, VHS-50, VHS-60/3, VHS-60/4, VT30, VT50, W345B II, W345C MH
1451063
BOLT
P16
P16
1442135
BOLT
P16
P16
1451892
BOLT
P16
P16
1650286
BOLT-SPECIAL
CR20, P16
CR20, P16
2044090
BOLT
BH27
BH27
2044063
BOLT
BH27
BH27
140G, 14H, 16H
2422060
BOLT-SOCKET HEAD
S305, VHS-50
S305, VHS-50
1746391
BOLT-SOCKET HEAD
G320, MP15, P360, S305, VHC-30, VHS-50, VRG30, VT30, VT50
G320, MP15, P360, S305, VHC-30, VHS-50, VRG30, VT30, VT50
MP15, VT50