1718675 BOLT-SPECIAL Caterpillar parts
324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330B L, 330C L, 330D L, 330D LN, 336D L, 336D LN, 336E LN, 345D L, 345D L VG, 349E L VG, CW-10
Rating:
Alternative (cross code) number:
CA1718675
171-8675
1718675
CA1718675
171-8675
1718675
Weight: 1 pounds 0 kg.
EXCAVATOR, QUICK COUPLER-DWL,
Compatible equipment models: 1718675:
Number on catalog scheme:
22
For full view, you need register
Information:
Illustration 1 g02280393
(1) Rubber toric sealNote: Rubber toric seals and all of the surfaces in contact with the rubber toric seals must be clean and dry at assembly. Before installation, put a thin layer of oil on the surfaces of the metal seals that are in contact. Put lubricant on all other seals at assembly. The seal rings must be assembled square with the bore. Do not bulge or twist the toric rings. (2) Before assembly, lubricate the O-ring seal lightly with the lubricant that is being sealed. (3) Bolts Quantity ... 6 Initial torque ... 22 6 N m (16 4 lb ft) Intermediate torque ... 125 20 N m (90 15 lb ft) Final torque ... 250 14 N m (185 10 lb ft)Note: If the bolt is not fully engaged at the initial torque, the bolt should be scrapped.Note: Apply Loctite 242 Removable Threadlocker to threads after the bearing adjustment. Then, tighten the bolts to the specific torque. (4) 6G-4361 Shim Thickness ... 4.49 0.08 mm (.177 .003 inch) (5) Washers Quantity ... 20Note: Before assembly, apply 4C-5592 Anti-Seize Compound to the washer face. (6) Nuts Quantity ... 20 Final torque ... 1700 200 N m (1254 148 lb ft)Note: Before assembly, apply 4C-5592 Anti-Seize Compound to the threads for the nuts. (7) Before assembly, lubricate the O-ring seal lightly with the lubricant that is being sealed. (8) Before assembly, apply Loctite 242 Removable Threadlocker to threads of the six bolts. (9) Before assembly, lubricate the shaft lightly with the lubricant that is being sealed. (10) Rubber toric sealNote: Rubber toric seals and all of the surfaces in contact with the rubber toric seals must be clean and dry at assembly. Before installation, put a thin layer of oil on the surfaces of the metal seals that are in contact. Put lubricant on all other seals at assembly. The seal rings must be assembled square with the bore. Do not bulge or twist the toric rings. (11) The rim mounting surfaces are to be free of paint and grease prior to assembly.
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 3...
320B, 320C, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 321C, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, ...
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
325C, 330, 330 FM L, 330B L, 330C L, 330D, 330D L, 336D L, 345B, 345C, 345C L, 345D, 349D L, 350, 350 L, OEMS, TK1051
16M, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325C, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 3...
320C, 325C, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 34...
1090, 2290, 320D, 320D FM, 322C FM, 324D FM, 324D FM LL, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 336E, 345C, 511, OEMS, TK711
330B L, 330C, 330C FM, 330C L, 330D FM, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 551, 552, OEMS, TK751, TK752
330, 330 FM L, 330 L, 330B, 330B L, 345B II, 345B II MH, 345B L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, 385B, 525C, 525D, 535C, 535D, 545C, 545D, 555D, GSH15, GSH15-6...
320D, 330C L, 330D L, 336D, 336D2, 336E, 336E H, 336E L, 336E LH, 336F L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 36...
325B L, 330, 330 FM L, 330 L, 330B, 330B L, OEMS
330, 330 FM L, 330 L, 330B, 330B L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, E300B, M330D, W330B
324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330B L, 330C L, 330D L, 330D LN, 336D L, 336D LN, 336E LN, 345D L, 345D L VG, 349E L VG, CW-10
2470C, 2570C, 2670C, 553C, 563C, 573, 573C, HF201, HF201B, HF221, SC-57, SH-56B, SS-56
2714880
BOLT-SOCKET HEAD
GSH15, GSH15-60, GSH22B, GSH9, GSH9B, HF201, HF201B, HF221
GSH15, GSH15-60, GSH22B, GSH9, GSH9B, HF201, HF201B, HF221
HF201, HF201B, HF221, W330B
3155490
BOLT-12 POINT HEAD
HF181, HF201, HF221
HF181, HF201, HF221
330B L, 330C, 330C FM, 330C L, 330D FM, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 551, 552, OEMS, TK751, TK752
325D L, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, W345B II, W345C MH
345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, W345C MH
345B II, 345B II MH, 345C, 345C L, 345C MH, 365B, 365B II, 365B L, W345B II, W345C MH
2276181
BOLT
345C, 345C L, 345C MH, W345C MH
345C, 345C L, 345C MH, W345C MH
345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D L, 349D L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, W345B II, W345C MH
4534169
BOLT
320D, 320D LN, 320D LRR
320D, 320D LN, 320D LRR