2089297 BOLT-FLANGE HEAD Caterpillar parts
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, 584, 797F, C15
Rating:
Alternative (cross code) number:
CA2089297
208-9297
2089297
CA2089297
208-9297
2089297
Weight: 0.08 pounds 0 kg.
BACKHOE LOADER, TRUCK,
This part in 2 request:
Show.
This information for suppliers only!
2024-05-07
2024-05-07
Compatible equipment models: 2089297:
Number on catalog scheme:
10
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 3 Start By:
Remove the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank (Steering, Brake) - Remove". Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01368123
Remove bolts (1) and bracket (2).
Illustration 2 g01368291
Remove filter (3). Remove cap (4), retaining ring (5), and strainer assembly (6).
Illustration 3 g01368325
Attach Tooling (A) and a suitable lifting device to tank assembly (7). The weight of tank assembly (7) is approximately 125 kg (275 lb).
Remove bolts (8) in order to separate tank assembly (7).
Illustration 4 g01368466
Remove nuts (10) and screen assemblies (9). Remove nut (12) and screen assembly (11).
Illustration 5 g01368590
Remove nuts (13) and screen assemblies (14).
Illustration 6 g01368591
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (15) and O-ring seal (16). Remove nuts (17), body (18), seal (19), valve (20), spring (21), and valve guide (22).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 3 Start By:
Remove the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank (Steering, Brake) - Remove". Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01368123
Remove bolts (1) and bracket (2).
Illustration 2 g01368291
Remove filter (3). Remove cap (4), retaining ring (5), and strainer assembly (6).
Illustration 3 g01368325
Attach Tooling (A) and a suitable lifting device to tank assembly (7). The weight of tank assembly (7) is approximately 125 kg (275 lb).
Remove bolts (8) in order to separate tank assembly (7).
Illustration 4 g01368466
Remove nuts (10) and screen assemblies (9). Remove nut (12) and screen assembly (11).
Illustration 5 g01368590
Remove nuts (13) and screen assemblies (14).
Illustration 6 g01368591
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (15) and O-ring seal (16). Remove nuts (17), body (18), seal (19), valve (20), spring (21), and valve guide (22).
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
1090, 1190, 1190T, 120G, 120H ES, 120H NA, 120M, 1290T, 12G, 12M, 130G, 135H NA, 140G, 160G, 16G, 216, 216B, 216B3, 226B, 226B3, 228, 2290, 232B, 236, 236B, 236B3, 2384C, 2390, 2391, 242B, 242B3, 246C...
10 FT, 10-20B, 10B, 215B, 215C, 215D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 2470C, 2570C, 2670C, 2864C, 30/30, 301.5, 302.5, 305.5E, 305E, 308E2 CR, 3114, 3116, 3126...
120M, 120M 2, 12M, 216, 228, 236, 2384C, 2470C, 2484C, 2570C, 2670C, 3034, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312B L, 312C, 312E, 312E L, 314E CR, 314E LCR, 315, 315B L, 315C, 316E L, 3...
1090, 115, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 1390, 140G, 140H, 140H NA, 140K, 140K 2, 140M, 140M 2,...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 259B3, 262C, 262C2, 262D, 267, 267B, 268B, 272C, 272D, 272D ...
120M, 120M 2, 12M, 12M 2, 140K, 140M, 140M 2, 14M, 160K, 160M, 160M 2, 16M, 24M, 30/30, 303, 303.5C, 303.5D, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 305, 305.5D, 305.5E, 305C CR, 305D CR, 307B...
143H, 163H, 163H NA, 205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, 303, 304, 305, 305.5, 306, 306E, 307, 307C, 307D, 307E, 308C, 308D, 311, 311B, 311C, 312, 312B, 312C L, 312D2, 312D2 GC, 3...
1090, 1190, 1190T, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 242B, 246C, 246D, 247, 247B, 247...
12M 2, 140M, 160M, 16M, 2470C, 24M, 2570C, 2670C, 2864C, 302.7D, 304, 304.5, 305, 307, 320B FM LL, 320C, 320D, 320D FM, 320D L, 323D L, 325, 325D, 325D L, 328D LCR, 329D L, 330C, 330D, 330D L, 330D MH...
2384C, 2484C, 416F, 420F, 422F, 428F, 430F, 432F, 517, 527, 559C, 579C, 793F, 793F CMD, 793F-XQ, 795F AC, 797F, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 834K, 836G, 8...
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, 450F, 584, AP-600D, AP-655D, AP555E, AS4251C, AS4252C, M312, M313C, M313D, M315, M315C, M315D, M316C, M316D, M318, M318C, M318C MH, M318D, M320, M322C
0925524
BOLT
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, 777F, 789D, 793, 793B, 793C, 7...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, 777F, 789D, 793, 793B, 793C, 7...
206, 206B, 212, 212B, 214B, 224B, 416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, ...
120M, 120M 2, 12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD, 416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, 533, 543, 564, 574B, 623H, 623K, 623K LRC, 980K, 980M, 982M, AP-600D...
7X3370
BOLT
227, 312B L, 312C, 315, 315B L, 317, 416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, 65, 75, AP-600D, AP-655D, CB-214B, CB-224C, CB-525B, CB-534, CB-535B, PS-500
227, 312B L, 312C, 315, 315B L, 317, 416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, 65, 75, AP-600D, AP-655D, CB-214B, CB-224C, CB-525B, CB-534, CB-535B, PS-500
206, 212, 422F, 428F, 432F, 434F, 444F, 554, 994, 994D, C-9, C13, C9, CB-534D, CB-535B, CD-54, CX28, R2900G, R3000H, TH31-E61, TH35-C13T
205B, 206B, 211B, 212B, 305.5, 306, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 312B L, 313B, 318B, 320 L, 320B, 320B U, 320C, 320N, 321B, 321C, 322 FM L, 322B, 322C, 325, 325 L, 325B, ...
8T0339
BOLT-SOCKET HEAD
205, 206, 206B, 212, 212B, 420F, 430F, 432F, 444F, 793F CMD
205, 206, 206B, 212, 212B, 420F, 430F, 432F, 444F, 793F CMD
420F, 430F, 432F, 444F
2089295
BOLT-FLANGE HEAD
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, 584, 797F, CX31-C15I, CX35-P800, TH35-C15I
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F, 584, 797F, CX31-C15I, CX35-P800, TH35-C15I
120K, 120K 2, 12K, 140K, 140K 2, 160K, 300.9D, 301.7D CR, 320 L, 322 LN, 325 LN, 330 L, 350, 432F, 444F, 621K, 623K, 623K LRC, 627K, 627K LRC, 789D, 793D, 793F, 793F OEM, 797F, 824G, 824G II, 824H, 82...