AVSPARE.COM
parts catalog

BOLT-WHEEL 2294895 - Caterpillar


2294895 BOLT-WHEEL Caterpillar parts 216B, 216B3, 226B, 226B3, 242B, 247B, 247B3
Rating:
45
Alternative (cross code) number:
CA2294895
229-4895
2294895
Caterpillar 2294895 BOLT-WHEEL
Weight: 0.35 pounds 0 kg.

Buy BOLT-WHEEL 2294895 Caterpillar genuine, new aftermarket tractor parts with delivery
MULTI TERRAIN LOADER, SKID STEER LOADER,

Compatible equipment models: 2294895:

MULTI TERRAIN LOADER  247B   247B3  
SKID STEER LOADER  216B   216B3   226B   226B3   242B   Caterpillar
Number on catalog scheme: 3
  For full view, you need register

Information:


Illustration 1 g00849168
Steering Frame Lock
Install the steering frame lock link.
Engage the parking brake.
Shift the transmission to neutral.
Start the engine and warm the hydraulic oil to normal operating temperature.
Position the bucket so that the bottom of the bucket is flat on the ground.
Increase the engine RPM to high idle. Maintain high idle RPM for duration of the test.
Move the lift control lever to the LIFT position. Hold the lift control lever in this position until the lift cylinder reaches the end of travel. Record the amount of time that is required for the bucket to travel from the ground to the full RAISE position. The lift time should be 9.6 seconds.
Lower the bucket until the work tool is barely off the ground. Set the lower kickout.
Raise the bucket to the maximum height.
With the engine at high idle, move the lift control lever to the full LOWER position. Record the time from the full lift position to the lower kickout position at the ground. The time should be 4.3 seconds.
Move the bucket to the full LIFT position. Position the bucket in the full TILT BACK position.
With the engine at high idle, move the tilt control lever to the full DUMP position. Hold the tilt control lever in this position until the bucket is at the full DUMP position. Record the time to the full DUMP position. The time should be 2.5 seconds.
Position the bucket approximately 300 mm (12 inch) above the ground. Make sure that the bottom of the bucket is parallel to the ground.
With the engine at high idle and with the bucket in a level position, move the tilt control lever to the full TILT BACK position. Hold the tilt control lever in this position until the bucket is against the stop. Record the time from the level position to the full TILT BACK position. The time should be 2.0 seconds.If the implement cycle times are not correct, check the following components:
Check the hydraulic pump performance.
Check the settings of the relief valves.
Check the makeup valves in the control valve.
Check the valve stems in the control valve.
Check the piston seals in the cylinders.

Caterpillar parts catalog:

Caterpillar parts catalog
299D2 and 299D2XHP Compact Track Loader BY400001-UP (MACHINE) POWERED BY C3.8 Engine
216B3 Skid Steer Loader SL300001-UP (MACHINE) POWERED BY C2.2 Engine
226B3 Skid Steer Loader F3D00001-UP (MACHINE) POWERED BY C2.2 Engine
216B 226B 232B 242B Skid Steer Loader BXM00001-04224 (MACHINE) POWERED BY 3024C Engine
247B 257B Multi Terrain Loader MTL00001-05074 (MACHINE) POWERED BY 3024C Engine
226B2 Skid Steer Loader MJH10575-UP (MACHINE) POWERED BY 3024C Engine
216B2 Skid Steer Loader RLL06800-UP (MACHINE) POWERED BY 3024C Engine
247B2 Multi Terrain Loader MTL05075-UP (MACHINE) POWERED BY 3024C Engine
216B3 Skid Steer Loader JXM00001-UP (MACHINE) POWERED BY C2.2 Engine
226B3 Skid Steer Loader MWD00001-UP (MACHINE) POWERED BY C2.2 Engine
247B3 Multi Terrain Loader TSL00001-UP (MACHINE) POWERED BY C2.2 Engine
247B3 Multi Terrain Loader ESL00001-UP (MACHINE) POWERED BY C2.2 Engine
226B3 Skid Steer Loader SNA00001-UP (MACHINE) POWERED BY C2.2 Engine
226B3 Skid Steer Loader AS200001-UP (MACHINE) POWERED BY C2.2 Engine
216B3 Skid Steer Loader DSN00001-UP (MACHINE) POWERED BY C2.2 Engine
216B3 Skid Steer Loader CD300001-UP (MACHINE) POWERED BY C2.2 Engine
247B3 Multi Terrain Loader KB300001-UP (MACHINE) POWERED BY C2.2 Engine
226B3 Skid Steer Loader DXZ00001-UP (MACHINE) POWERED BY C2.2 Engine
216B3 Skid Steer Loader HR200001-UP (MACHINE) POWERED BY C2.2 Engine
272D2 & 272D2 XHP Skid Steer Loader BL200001-UP (MACHINE) POWERED BY C3.8 Engine
299D2 XHP & 299D2 Compact Track Loader DX200001-UP (MACHINE) POWERED BY C3.8 Engine
297D2 & 297D2 XHP Multi Terrain Loader BL700001-UP (MACHINE) POWERED BY C3.8 Engine
299D2 XHP & 299D2 Compact Track Loader DX200001-UP (MACHINE) POWERED BY C3.8 Engine


Parts bolt Caterpillar catalog:

8T7930 BOLT
115, 216, 226B, 226B3, 228, 2384C, 242B, 247, 247B, 247B3, 2484C, 24M, 30/30, 307, 311C, 314D CR, 314D LCR, 314E CR, 314E LCR, 320B, 320C, 320D, 320D L, 320D LN, 320D2 L, 320E, 320E L, 320E LN, 320E L...
4F3658 BOLT-PLOW
120G, 120H, 120H ES, 120H NA, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 143H, 14E, 16, 160G, 160H, 160M, 216, 216B, 216B3, 226B, 226B3, 22...
4F3654 BOLT-PLOW
120, 120B, 120G, 120H, 12E, 12F, 12H, 12H NA, 12M 2, 140H, 140H NA, 140M, 14E, 160M, 216, 216B3, 226B3, 228, 236B3, 236D, 242B3, 242D, 246C, 246D, 247B3, 252B3, 256C, 257B3, 257D, 259B3, 259D, 262C, 2...
2089277 BOLT-FLANGE HEAD
12H, 12M, 140G, 140M, 140M 2, 160M, 160M 2, 216B3, 226B3, 2290, 236B3, 2390, 2391, 242B3, 247B3, 2491, 252B3, 257B3, 2590, 259B3, 272D, 272D XHP, 299D, 299D XHP, 3126B, 3126E, 322C, 322C FM, 324D, 324...
2065143 BOLT
16M, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236B, 236B3, 242B, 242B3, 247B3, 252B, 252B3, 257B3, 259B3, 267B, 268B, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 621H, 621K, 623H, 623K, 623K...
7X0418 BOLT
247, 247B, 257B, 375 L, 572R, 572R II, 615, 615C, 777C, 777D, 777F, 854G, 854K, 931C II, 933, 939, CP-433C, CS-431C, CS-563C, CS-573C, CS-583C, D10N, D10R, D11N, D11R, D11T, D7H, D7R, D7R II, D7R XR, ...
8T9311 BOLT
10 FT, 10-20B, 10B, 120H, 120H ES, 120H NA, 12G, 12H, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G, 160H, 160H ES, 160H NA, 163H, 235C, 247, 247B, 257B, 3508, 3508B, 3508C, 35...
6V8200 BOLT-SOCKET HEAD
205B, 206B, 211B, 212B, 213B, 214B, 224B, 247, 247B, 247B3, 257B, 257B3, 259B3, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 301.5, 302.5, 302.5C, 303.5C, 303.5D, 303.5E, 303C CR, 3...
1A0168 BOLT
120, 140, 16, 183B, 245, 245D, 247, 247B, 24H, 3406E, 3408, 3408C, 3412, 3412C, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5110B, 5130, 5130B, 5230B, 589, 621E, 623E, 627B, 627E, 627F...
1110859 BOLT
120M 2, 216B, 216B3, 226B, 226B3, 232B, 2384C, 242B, 247B, 247B3, 2484C, 2570C, 257B, 2670C, 3.4B IOPU, 3024C, 3034, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 311F LRR, 312D2, 312D2 GC, 312D2 L, 31...
8T4173 BOLT
120H, 120H ES, 12H, 12H ES, 140H, 140H ES, 143H, 14H, 14H NA, 160H, 160H ES, 163H, 163H NA, 16H, 16H NA, 216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 2470C, 247B, 247B3, 252B, 252B3, 2570...
8T0341 BOLT-SOCKET HEAD
120M, 12M, 14M, 205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 216B3, 224B, 226B, 226B3, 236D, 242B, 242D, 246C, 2470C, 247B, 256C, 2570C, 257B, 262C, 262C2, 2670C, 267B, 268B, 272C, 277C, 277C2, ...
2529167 BOLT-SOCKET HEAD
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L,...
2896347 BOLT-SOCKET HEAD
216B, 216B3, 226B, 226B3, 232B, 242B, 242B3
2390169 BOLT-SPECIAL
226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3024C, C2.2
2497263 BOLT
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3003, 301.5, 3011C, 3013, 3013C, 3014, 3024, 3024C, 303.5, BB-621C, C1.1, C1.5, C1.6, C2.2, CB-14, CB-214D, CB-214E, CB-22, CB-334D, CB-334E, C...
1806118 BOLT
226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3003, 301.5, 3011C, 3013, 3013C, 3014, 302.5, 3024, 3024C, 303.5, 304.5, AP-255E, BB-621C, C0.5, C1.1, C1.5, C1.6, C2.2, CB-22, CB24B
3170960 BOLT-SPECIAL
226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3024, 3024C, C1.5, C2.2
7X0870 BOLT
14M, 16M, 3116, 3176, 3176B, 3176C, 3196, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 420D, 515, 525, 525B, 525C, 535B, 535C, 545, 545C, ...
0965969 BOLT-SOCKET HEAD
312D, 315D L, 319D, 320D, 320D FM, 325D L, 330D L, 345C, 345C L, 365C, 385C, 385C FS, 385C L, 420D, 574, 621K, 623K, 623K LRC, 627K, 627K LRC, 725, 730, 735, 740, 770, 772, 924G, 924H, 928H, C9, CB-14...
3135645 BOLT
226B, 226B3, 242B, 247B, 257B, 844K, 854K, 990K, 992K, 993K
3135644 BOLT-12 POINT HEAD
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B
8T2192 BOLT
120M 2, 216B, 216B3, 226B, 226B3, 236D, 2384C, 242B, 242D, 246D, 247B, 247B3, 2484C, 257D, 259D, 262D, 267B, 268B, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 436, 525D, 535D, 545D, 555D, ...
8T0341 BOLT-SOCKET HEAD
120M, 12M, 14M, 205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 216B3, 224B, 226B, 226B3, 236D, 242B, 242D, 246C, 2470C, 247B, 256C, 2570C, 257B, 262C, 262C2, 2670C, 267B, 268B, 272C, 277C, 277C2, ...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.