2770359 BOLT Caterpillar parts
CX35, CX35-C18I, CX35-P800
Rating:
Alternative (cross code) number:
CA2770359
277-0359
2770359
CA2770359
277-0359
2770359
Weight: 0.69 pounds 0 kg.
PETROLEUM PACKAGE, TRANSMISSION-ONHIGHWAY,
Compatible equipment models: 2770359:
Number on catalog scheme:
46
For full view, you need register
Information:
Installation Procedure
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Illustration 1 g00851828
Attach a hoist and a suitable lifting device to grapple arm (1) .
Insert grapple arm (1) into the felling head.
Install pivot pin (5) .
Install bolt (6) and the nut into pivot pin (5) .
Illustration 2 g00854323
Typical Example
Install locknut (7) and the washer on pivot pin (5). Note: The nut should already be installed if the left grapple arm cylinder was removed.Tighten the locknut until the clearance between arm hub (8) and frame hub (9) is 1 .5 mm (.04 .02 inch).
Remove the lifting device.
Illustration 3 g01039991
Place cylinder (4) into the grapple arm frame.
Install pivot pin (2) .
Install bolt (3) and the nut into pivot pin (2) .
Connect hydraulic hose assembly (9) to the head end of cylinder (4). Connect the hydraulic hose assembly to the rod end of cylinder (4) .
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Illustration 1 g00851828
Attach a hoist and a suitable lifting device to grapple arm (1) .
Insert grapple arm (1) into the felling head.
Install pivot pin (5) .
Install bolt (6) and the nut into pivot pin (5) .
Illustration 2 g00854323
Typical Example
Install locknut (7) and the washer on pivot pin (5). Note: The nut should already be installed if the left grapple arm cylinder was removed.Tighten the locknut until the clearance between arm hub (8) and frame hub (9) is 1 .5 mm (.04 .02 inch).
Remove the lifting device.
Illustration 3 g01039991
Place cylinder (4) into the grapple arm frame.
Install pivot pin (2) .
Install bolt (3) and the nut into pivot pin (2) .
Connect hydraulic hose assembly (9) to the head end of cylinder (4). Connect the hydraulic hose assembly to the rod end of cylinder (4) .
Caterpillar parts catalog:
Parts bolt Caterpillar catalog:
797F, CX35, CX35-C18I, CX35-P800, D7R II
AP-1055D, BG-2455D, BG-260D, CX31, CX31-C13I, CX31-C15I, CX31-C18I, CX31-P600, CX35-C18I, CX35-P800
3551624
BOLT
12M 2, 140M 2, 160M 2, 336E, 336E HVG, 336E L, 336E LH, 336E LN, 349E, 349E L, 349E L HVG, 349E L VG, 568 FM LL, 966K, 972K, 980K, 980K HLG, C13, C15, C18, C9.3, CX31-C13I, CX31-C18I, CX35-C18I, D6T L...
12M 2, 140M 2, 160M 2, 336E, 336E HVG, 336E L, 336E LH, 336E LN, 349E, 349E L, 349E L HVG, 349E L VG, 568 FM LL, 966K, 972K, 980K, 980K HLG, C13, C15, C18, C9.3, CX31-C13I, CX31-C18I, CX35-C18I, D6T L...
3196699
BOLT
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 311D LRR, 312D, 312E, 314D LCR, 319D, 319D L, 319D LN, 323D LN, 323D SA, 773F,...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 311D LRR, 312D, 312E, 314D LCR, 319D, 319D L, 319D LN, 323D LN, 323D SA, 773F,...
7X0302
BOLT
615C, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 793B, 824G, 825G, 826G, 980G, 994, C18, CX31-C18I, CX35-C18I, D1...
615C, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 793B, 824G, 825G, 826G, 980G, 994, C18, CX31-C18I, CX35-C18I, D1...
311D LRR, 311F LRR, 374D L, 374F L, C9, D6R, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL
1969445
BOLT-SOCKET HEAD
AP1000E, AP1055E, BG1000E, BG1055E, CB-434C, CB-434D, CB-44B, CB-534C, CB-534D, CB-54, CB-54B, CB-564D, CB-634C, CB-634D, CB-64, CD-54, CD-54B, CP-54B, CP-56, CP-573E, CP-64, CP-68B, CP-76, CS-533D, C...
AP1000E, AP1055E, BG1000E, BG1055E, CB-434C, CB-434D, CB-44B, CB-534C, CB-534D, CB-54, CB-54B, CB-564D, CB-634C, CB-634D, CB-64, CD-54, CD-54B, CP-54B, CP-56, CP-573E, CP-64, CP-68B, CP-76, CS-533D, C...
0991196
BOLT-SOCKET HEAD
120H, 12H, 12H NA, 140H, 140H NA, 303, D3G, D4G, D5G, E300, E300B, TH31-E61, TH35-E81
120H, 12H, 12H NA, 140H, 140H NA, 303, D3G, D4G, D5G, E300, E300B, TH31-E61, TH35-E81
CP-44, CP-74B, CS-44, CS-74B, CS-76B, CS-78B, CX35-P800, D6R, D6R III, D6R STD, D7R II, D7R XR, M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M32...
527, 561N, 572R II, CX35-P800, D5H, D5H XL, D5HTSK II, D5N, D5R LGP, D6H, D6H XL, D6H XR, D6M, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R II, D7R ...
1522638
BOLT
583T, 587T, CB-534C, CB-534D, CB-54, CB-64, CP-573E, CP-64, CS-573D, CS-64, CX35-P800, D8N, D8R, D8T, M318D MH, M322D MH, PL61, PL83, PL87, TH31-E61, TH35-C15I, TH35-E81
583T, 587T, CB-534C, CB-534D, CB-54, CB-64, CP-573E, CP-64, CS-573D, CS-64, CX35-P800, D8N, D8R, D8T, M318D MH, M322D MH, PL61, PL83, PL87, TH31-E61, TH35-C15I, TH35-E81
730C, CX28, CX31, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX31-P600, CX35, CX35-C18I, CX35-P800