BOLT-SPECIAL 3087081 - Caterpillar

ACTION REQUIRED
Follow these steps when replacing a failed tube.
Note: Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. Refer to the Operation and Maintenance Manual "Safety Section".
Refer to the Service Manual if/as necessary.
1. Loosen all bolts: pump to tank, support bracket to tank, and support bracket to pump holding the pump in place.
2. Remove the existing failed tube assembly and install new 367-7901 Tube Assembly to the pump and tighten.
3. Center the end of the new tube in the hole in the block on the tank wall.
4. Tighten the pump to the tank bolts, taking care not to change the alignment of the tube in the hole.
5. Adjust the support plate so that it sits flat against both the bottom of the tank and the end of the pump stack.
6. Tighten the bolts in the support plate to the tank bottom.
7. Tighten the bolts in the support plate to the end of the pump stack.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-24000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 6.0-hour job for Group 1
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-24000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 6.0-hour job for Group 2
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.