BOLT-FLANGE HEAD 3895170 - Caterpillar

Illustration 1 g01431052
Front view (A) Clearance between the clutch housing and the torque converter turbine across the diameter ... 1.29 0.25 mm (0.051 0.010 inch) (1) Torque for the 12 bolts ... 120 15 N m (90 11 lb ft) (2) Torque for the 20 bolts ... 120 15 N m (90 11 lb ft) (3) Torque for the 12 bolts ... 240 25 N m (175 18 lb ft)Note: Install the lip type seal until the lip type seal is flush with the face of the bearing retainer (4) within a distance of 0.00 0.25 mm (0.000 0.010 inch). (5) Lightly lubricate the sealing lip of the lip type seal with the lubricant that is being sealed. (6) Torque for the three bolts ... 120 15 N m (90 11 lb ft) (7) 1T-1253 Sleeve Bearing Inside diameter of the sleeve bearing after assembly of the sleeve bearing in the hub assembly ... 114.45 0.05 mm (4.506 0.002 inch) Installation depth of the sleeve bearing ... 1.0 0.5 mm (0.04 0.02 inch) (8) Torque for the bolt ... 240 25 N m (175 18 lb ft) (D) Inside diameter of the sleeve bearing after assembly of the sleeve bearing in the clutch adapter ... 209.663 0.066 mm (8.2544 0.0026 inch) (E) Clearance between the torque converter turbine and the torque converter stator across the diameter ... 0.82 0.12 mm (0.032 0.005 inch) (F) Clearance between the torque converter impeller and the torque converter stator across the diameter ... 0.82 0.12 mm (0.032 0.005 inch) (G) Clearance between the clutch housing and the torque converter impeller across the diameter ... 1.20 0.17 mm (0.047 0.007 inch) (9) 6I-8597 Friction Disc Quantity ... 3 Thickness of one new friction disc ... 5.59 0.08 mm (0.220 0.003 inch) (10) 6Y-7198 Plate Quantity ... 2 Thickness of one new plate ... 6.35 0.08 mm (0.250 0.003 inch) (11) Torque for the 30 bolts ... 120 15 N m (90 11 lb ft) (12) Torque for the 12 bolts ... 120 15 N m (90 11 lb ft)
Illustration 2 g01431053
Rear view (13) Torque for the 11 bolts ... 50 7 N m (37 5 lb ft) (14) Assemble the pipe plug without sealant on the threads of the pipe plug.