BOLT 3F0259 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench As     1    Start By:
Remove the oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01079095
Remove engine oil filter (6) with Tooling (A) .
Disconnect hose assembly (2) .
Remove bolts (1) and bolts (5) .
Remove engine oil filter base (3). Remove O-ring seals (4) from the engine oil filter base.