BOLT 4532857 - Caterpillar

Note: Rated loads should be used as a guide. Attachments, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.In European applications, the rated load is defined by EN 474-3. The rated operating load for a firm, level surface is defined by the least amount of weight of the following conditions.
85% of the full turn static tipping load
The minimum lifting capacity
The minimum tilt capacityThe rated operating load for rough terrain is defined by the least amount of weight of the following conditions.
75% of the full turn static tipping load
The minimum lifting capacity
The minimum tilt capacityFor North American applications, the rated operating load is defined by SAE J1197 Feb 91 as 50% of the full turn static tipping load.
Illustration 1 g00630434
Position (A) represents the placement height. Position (B) represents the reach.The maximum height from the ground to the top face of the forks is given for forks that are horizontal at maximum lift height. The reach from the front tires to the front face of the forks is given for forks that are horizontal at maximum lift height.Rated loads are based upon a standard machine with the following conditions:
lubricants
full fuel tank
enclosed ROPS
80 kg (176 lb) operator
17.5 R25 12 L2 or equivalent tires
optional 175 kg (386 lb) counterweight
Log and lumber forks should not be used with the high lift boom.
Table 1
RATED LOADS FOR LOG AND LUMBER FORKS WITH A STANDARD BOOM AND COUPLER FOR ALL NORTH AMERICAN CONDITIONS (SAE J1197 FEB 91)    
Fork Part Number    Fork Tine Length    Rated Operating Load    Placement Height
A    Reach
B    
154-8708    
1220 mm (4 ft)    
2126 kg (4677 lb)    
3582 mm (121 ft 9 inches)    
873 mm (2 ft 10 inches)    
Table 2
RATED LOADS FOR LOG AND LUMBER FORKS WITH A STANDARD BOOM AND COUPLER FOR EUROPEAN OPERATION ON ROUGH TERRAIN (EN 474-3)    
Fork Part Number    Fork Tine Length    Rated Operating Load    Placement Height
A    Reach
B    
154-8708    
1220 mm (4 ft)    
3189 kg (7016 lb)    
3582 mm (11 ft 9 inches)    
873 mm (2 ft 10 inches)    
Table 3
RATED LOADS FOR LOG AND LUMBER FORKS WITH A STANDARD BOOM AND COUPLER FOR EUROPEAN OPERATION ON A FIRM AND LEVEL SURFACE (EN 474-3)    
Fork Part Number    Fork Tine Length    Rated Operating Load    Placement Height
A    Reach
B    
154-8708    
1220 mm (4 ft)    
3614 kg (7951 lb)    
3582 mm (11 ft 9 inches)    
873 mm (2 ft 10 inches)    
Table 4
RATED LOADS FOR LOG AND LUMBER FORKS WITH A STANDARD BOOM AND NO COUPLER FOR ALL NORTH AMERICAN CONDITIONS (SAE J1197 FEB 91)    
Fork Part Number    Fork Tine Length    Rated Operating Load    Placement Height
A    Reach
B    
141-6271    
1220 mm (4 ft)    
2336 kg (5139 lb)    
3515 mm (11 ft 6 inches)    
712 mm (2 ft