BOLT 4F0253 - Caterpillar

2. Disconnect oil lines (3) and (4) from the torque converter outlet relief valve.3. Disconnect oil temperature line (5).4. Remove three bolts (2) and washers. Remove the torque converter outlet relief valve (1).Install Torque Converter Outlet Relief Valve (Power Shift)
1. Put clean SAE 30 oil on the seal behind the torque converter outlet relief valve. 2. Put the torque converter outlet relief valve (1) in position on the torque divider.3. Install the three bolts (2) and washers that hold the torque converter outlet relief valve in position. Tighten the bolts to a torque of 40 5 lb.ft. (5.5 0.7 mkg).4. Connect the oil temperature line (3).5. Connect oil lines (4) and (5) to the torque converter outlet relief valve.6. Install the left and center floor plates.Disassemble Torque Converter Outlet Relief Valve (Power Shift)
start by: a) remove torque converter outlet relief valve 1. Remove two bolts (6) and cover (5).2. Remove seal (4) from cover (5).3. Remove spring (3), spacers (2) and valve spool assembly (1). 4. Remove ring (10), retainer (9), spring (8) and plunger (7) from the valve spool.Assemble Torque Converter Outlet Relief Valve (Power Shift)
1. Make sure all of the parts of the torque converter outlet relief valve are clean and free of dirt and foreign material. 2. Install plunger (2), spring (3), retainer (4) and snap ring (5) in valve spool (1). 3. Install valve spool assembly (7), spacers (8), and spring (9) in body (6).4. Put seal (11) in cover (10).5. Install the cover and the two bolts and washers that hold the cover in position.end by: a) install torque converter outlet relief valve