BOLT 4Z8514 - Caterpillar

Illustration 30 g01092555
Install ring gear (15), hub (16) and four retainers (17) as a unit to wheel (3).Note: The top of spindle (24) should be 1 mm to 2 mm (0.039 inch to 0.078 inch) below the face of hub (16).
Remove Tooling (A) and bolts (18).
Apply Tooling (F) and then apply Tooling (J) to the threads of bolts (18) prior to installation.
Install eight bolts (18). Tighten bolts (18)