BOLT 5436833 - Caterpillar

Illustration 4 g00861132
Attach a suitable lifting device around hydraulic cylinder (5) and a hoist.
Illustration 5 g00861141
Remove bolt (6) .
Illustration 6 g00861146
Remove pin (7) and remove the hydraulic cylinder. The weight of hydraulic cylinder (5) is approximately 59 kg (130 lb).Disassembly and Assembly Information
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
D     127-4904     Repair Stand     1    
E     7M-7456     Bearing Mount Compound     1    
F     1P-1833     Adapter     1    
4C-9633 Puller Stud     1    
1A-1935 Full Nut     1    
6V-3160 Double Acting Cylinder     1    
9S-5565 Pin Puller Sleeve As     1    
3S-6224 Electric Hydraulic Pump Gp     1    
G     1P-0808     Multipurpose Grease     1    
H     1P-0510     Driver Gp     1    
J     9U-7868     Spanner Wrench     1    
127-8064 Adjustable Plate     1    
K     195-4609     Seal Pick     1    
Illustration 7 g00953100
(3) Apply Tooling (E) to the seal groove prior to assembling the wiper seal. (1) Lubricate sealing lips with a thin covering of the lubricant that is being sealed. (2) Lubricate sealing lips with a thin covering of the lubricant that is being sealed. (3) Lubricate sealing lips with a thin covering of the lubricant that is being sealed.Installation Procedure
Illustration 8 g00861132
Attach a suitable lifting device around hydraulic cylinder (5) and a hoist. Position hydraulic cylinder (5) to the grapple. The weight of hydraulic cylinder (5) is approximately 59 kg (130 lb).
Illustration 9 g00861146
Install pin (7) .
Illustration 10 g00861141
Install bolt (6) .
Illustration 11 g00861128
Remove the suitable lifting device and install pin (4) .
Install bolt (2) and connect hose assemblies (3) .End By:
Open the ball valves on the stick of the host machine.
Start the host machine and operate the grapple in order to purge any air that may be in the hydraulic lines.