BOLT 5F9339 - Caterpillar

Illustration 6 g00551323
Illustration 7 g00603421
Remove O-ring seals (37) from break off plug (34) .
Remove piston guide (36) and plunger guide (38) from break off plug (34) .
Remove bearing cup (39) and spacer (40) from break off plug (34) .
Remove pin (41) from break off plug (34) .
Illustration 8 g00551327
Remove O-ring seal (46) from pump housing (33) .
Remove spring (44) and control piston (43) from the swashplate assembly.
Remove valve plate (45) from the barrel.
Remove bearing cone (42) from the pump shaft.
Illustration 9 g00551331
Remove spacer (48) and barrel (47) from pump housing (33) .
Illustration 10 g00551336
Remove bearing (52) , retainer plate (49) , and piston assemblies (50) from swashplate assembly (51) .
Illustration 11 g00551339
Remove swashplate assembly (51) from pump housing (33) .
Illustration 12 g00551343
Remove pump shaft (53) and bearing cone (54) from pump housing (33) . Remove bearing cone (54) from pump shaft (53) .
Illustration 13 g00551349
Remove O-ring seal (56) from pump housing (33) .
Remove shaft seal (55) from pump housing (33) .
Illustration 14 g00551353
Remove bearings (57) from pump housing (33) .
Remove shaft seal (59) from pump housing (33) .
Use Tooling (A) (not shown) to remove ring (60) (not shown) from pump housing (33) .
Remove bearing cup (58) from pump housing (33) .
Illustration 15 g00551357
Remove O-ring plug (61) and the O-ring seal.
Illustration 16 g00551360
Remove pin (62) from barrel (47) .
Illustration 17 g00551364
Illustration 18 g00551373
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Position barrel (47) in a suitable press, as shown. Use Tooling (B) and the press in order to compress spring (64) .
Use Tooling (C) to remove ring (63) . Remove spring (64) and spring seat (65) from barrel (47) .