5I5029 BOLT Caterpillar parts
318C, 319C, 320 L, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN, E200B
Rating:
Alternative (cross code) number:
CA5I5029
5I-5029
5I5029
CA5I5029
5I-5029
5I5029
Weight: 0.03 pounds 0 kg.
EXCAVATOR,
Compatible equipment models: 5I5029:
Number on catalog scheme:
1
For full view, you need register
Information:
Introduction
This section discusses the Setup Menu dialogs. Use these dialogs in order to access the AccuGrade System setup items.Note: The contents of the "Setup Menu" dialog are site configurable. Depending on the Operator Configuration settings of your system and machine settings, the number of items in the "Setup Menu" may vary.Table 1 lists the default menu items.Table 2 lists the additional menu items. Contact your Site Supervisor or your Caterpillar Dealer in order to turn on these options.
Table 1
Setup Menu - Configuration Default Menu Items
Menu Item Description
"Diagnostics" The AccuGrade System software shows diagnostic information about the devices the software detects and also the GPS receiver.
"Light Bar Scales" The "Light Bar Scales" dialogs set the vertical and horizontal tolerances that apply to the LED indicators on the light bars.
"Restore Settings" Use the "Restore Settings" dialog in order to restore previously saved display settings or machine settings.
Table 2
Setup Menu - Configuration Additional Menu Items
Menu Item Description
"Avoidance Zone" The "Avoidance Zone" dialog allows you to configure the distance from an avoidance zone when you need to be warned. This varies for different applications.
"Beeper" The beeper can be configured in order to provide an audible signal for when various events occur.
"Display and Light Bar Brightness" The "Display and Light Bar Brightness" dialog sets the brightness of the Display and light bars. By default, the dialog is only available in the "Setup Menu – Configuration"
"Map Recording" The main purpose of "Map Recording" is to display position and attribute information on the Plan View. Terrain logging files (.st) are also recorded when using certain map recording types. Terrain logging files are used in the AccuGrade Office
"Text Items" "Text Items" allows you to customize the text items on the Display in order to suit your requirements.
"Save Settings" The "Save Settings" dialog allows you to save your Display and/or machine settings to the data card.
"GPS Receiver Configuration" "GPS Receiver Configuration" dialog allows you to send a configuration file to the receiver without loading a design. In order to access the "Setup Menu" dialog, complete the following steps:
Press the "Menu" key until the "Setup Menu" soft key is displayed.
Press the "Setup Menu" soft key. Refer to Illustration 1.
Illustration 1 g01267649
Note: Changes made to the Setup Menu options take effect as soon as you exit the "Setup Menu" dialog.Working with the Setup Menu
Press the Down Arrow or the Up Arrow in order to scroll through the available options. Press the "OK" key in order to select the appropriate item.Within any of the "Setup Menu – Configuration" options, the following steps apply:
Press the "OK" key in order to save any setup changes.
Press the "ESC" key in order to close the dialog without changing any setup options. A warning appears.
Press the "OK" key in order to confirm that you want
This section discusses the Setup Menu dialogs. Use these dialogs in order to access the AccuGrade System setup items.Note: The contents of the "Setup Menu" dialog are site configurable. Depending on the Operator Configuration settings of your system and machine settings, the number of items in the "Setup Menu" may vary.Table 1 lists the default menu items.Table 2 lists the additional menu items. Contact your Site Supervisor or your Caterpillar Dealer in order to turn on these options.
Table 1
Setup Menu - Configuration Default Menu Items
Menu Item Description
"Diagnostics" The AccuGrade System software shows diagnostic information about the devices the software detects and also the GPS receiver.
"Light Bar Scales" The "Light Bar Scales" dialogs set the vertical and horizontal tolerances that apply to the LED indicators on the light bars.
"Restore Settings" Use the "Restore Settings" dialog in order to restore previously saved display settings or machine settings.
Table 2
Setup Menu - Configuration Additional Menu Items
Menu Item Description
"Avoidance Zone" The "Avoidance Zone" dialog allows you to configure the distance from an avoidance zone when you need to be warned. This varies for different applications.
"Beeper" The beeper can be configured in order to provide an audible signal for when various events occur.
"Display and Light Bar Brightness" The "Display and Light Bar Brightness" dialog sets the brightness of the Display and light bars. By default, the dialog is only available in the "Setup Menu – Configuration"
"Map Recording" The main purpose of "Map Recording" is to display position and attribute information on the Plan View. Terrain logging files (.st) are also recorded when using certain map recording types. Terrain logging files are used in the AccuGrade Office
"Text Items" "Text Items" allows you to customize the text items on the Display in order to suit your requirements.
"Save Settings" The "Save Settings" dialog allows you to save your Display and/or machine settings to the data card.
"GPS Receiver Configuration" "GPS Receiver Configuration" dialog allows you to send a configuration file to the receiver without loading a design. In order to access the "Setup Menu" dialog, complete the following steps:
Press the "Menu" key until the "Setup Menu" soft key is displayed.
Press the "Setup Menu" soft key. Refer to Illustration 1.
Illustration 1 g01267649
Note: Changes made to the Setup Menu options take effect as soon as you exit the "Setup Menu" dialog.Working with the Setup Menu
Press the Down Arrow or the Up Arrow in order to scroll through the available options. Press the "OK" key in order to select the appropriate item.Within any of the "Setup Menu – Configuration" options, the following steps apply:
Press the "OK" key in order to save any setup changes.
Press the "ESC" key in order to close the dialog without changing any setup options. A warning appears.
Press the "OK" key in order to confirm that you want
Caterpillar parts catalog:
Parts bolt Caterpillar catalog:
320C, 7A, 7S, 814S, 824G, 824G II, 824H, 824K, 824S, 825G, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 8A, 910, 910E, 910G, 910K, 914G, 914K, 931B, 931C II, 933, 93...
320C, 320D, 324D L, 325B L, 325C, 325D L, 328D LCR, 329D L, 615, 7A, 7S, 814F, 814F II, 814S, 816B, 816F, 816F II, 824C, 824S, 826H, 834B, 8A, 8U, D6R III, D6T, D6T LGP, D6T XL, D7G, D7G2, D7H, G320, ...
320C FM, 325C FM, 330C FM, 330D, 345C L, 345D, 349D L, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5080, 5090B, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 79...
1390, 2484C, 2590, 320 L, 320B, 320C, 320D, 320D FM, 320D2, 320D2 L, 320N, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D FM LL, 324D L, 324D LN,...
320C, 938H, D6N, D7H, D8N
320C FM, 320D, 320D FM, 320D FM RR, 320D L, 322C, 322C FM, 324D FM, 325C FM, 325D FM, 325D FM LL, 325D MH, 330B L, 330C, 330C FM, 330C L, 330D FM, 330D MH, 345B II, 345B L, 345C, 345C L, 345C MH, 365B...
320C FM, 322B L, 322C, 322C FM, 325B L, 325C, 325C FM, 330B L, 330C FM, 330C L, 330C MH, 345B, 345B II, 345B II MH, 5110B, BA18, D25C, D30C, D350C, M325B, W330B, W345B II
320C FM, 320D, 320D FM, 320D FM RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329D L, 329E, 329E L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 345D L, 349...
320B, 320C, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 321C, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, ...
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
16M, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325C, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 3...
320C, 325C, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 34...
312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 316E L, 318E L, 320D, 320D L, 320E L, 321D LCR, 324D, 324D L, 324E L, 324E LN, 325D, 325D L, 329D, 329D L, 329E L, 330D L, 336D, 336D L, 336D2, 336E...
4532841
BOLT
308D, 314C, 314D LCR, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 323D L, 323D LN, 323D ...
308D, 314C, 314D LCR, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 323D L, 323D LN, 323D ...
4532840
BOLT
308D, 314C, 314D LCR, 320D2, 321C, 321D LCR, 324D, 328D LCR, 329D L, 336E, 336E L, 336E LH, 340D2 L, 345C, 345D L, 349D, 349D L, 349E, 349F L, 390F L
308D, 314C, 314D LCR, 320D2, 321C, 321D LCR, 324D, 328D LCR, 329D L, 336E, 336E L, 336E LH, 340D2 L, 345C, 345D L, 349D, 349D L, 349E, 349F L, 390F L
4471708
BOLT
311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR, 324D, 324D FM, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 329D, 329D L,...
311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR, 324D, 324D FM, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 329D, 329D L,...
314C, 385B, 390D, 390D L, 390F L, 795F AC, 795F XQ
115, 314C, 320D FM, 322C FM, 324D FM LL, 325C FM, 325D FM, 330C FM, 330D FM, 350, 568 FM LL, P16
318C, 318E L, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D2, 320D2 GC, 320D2 L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D2 L, 323E L, 324D L, 324E LN, 3...
318C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E L, 320E LN, 320E LRR, 320E RR, 322C, 323D L, 323D LN, 323D SA, 323D2...
4538030
BOLT AS
318C, 318E L, 319C, 320C, 320C L, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E LRR, 320E RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 324E LN, 325D L, 328D LCR, 329D, 329D L...
318C, 318E L, 319C, 320C, 320C L, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E LRR, 320E RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 324E LN, 325D L, 328D LCR, 329D, 329D L...
318C, 319C, 320B FM LL, 320B U, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 320D L, 320D LRR, 320D RR, 321D LCR, 322B L, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN,...
318C, 319C, 320C
5I7730
BOLT
318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN