BOLT-12 POINT HEAD 5P8086 - Caterpillar

REBE7952-00
23Jan2012
U-39
D-37
O-40
Before/After
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER PUMP OIL SUPPLY HOSE ON CERTAIN C175-16 PETROLEUM GENERATOR SET ENGINES
1361 7554 PS43492
This Program must be administered either before or after failure.In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43492" as the Part Numberand "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
31Jan2014
PROBLEM
An oil leak may result in the area of the jacket water pump on certain C175-16 Petroleum Generator Set Engines due to the current hose. If the existing hose and fittings are not updated, a leak may result.
AFFECTED PRODUCT
Model Identification Number
C175-16 P6L00103, 105-145
PARTS NEEDED
Qty
Part Number Description
1 6V9850 ADAPTER-ELBOW
1 2287088 SEAL-O-RING-ORFS
2 2287089 SEAL-O-RING-ORFS
1 3771501 HOSE AS-OIL
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-10000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Remove the 315-5581 Oil Supply Hose for the jacket water pump. Refer to Image1.1.1.
Image1.1.1
Install the 6V-9850 Elbow, 228-7089 O-rings, and 228-7088 O-ring. Refer to Image1.2.1.
Image1.2.1
Install the 377-1501 Hose. Refer to Image1.3.1.
Image1.3.1