5P8222 BOLT Caterpillar parts
D10
Rating:
Alternative (cross code) number:
CA5P8222
5P-8222
5P8222
CA5P8222
5P-8222
5P8222
Weight: 2 pounds 1 kg.
Information:
BODY DIAMETER
29.06
mm
GRIP LENGTH
105
mm
HEAD HEIGHT
32
mm
HEX SIZE
38.1
mm
LENGTH
168
mm
MATERIAL
Steel - Min Tensile Strength 1170 MPa - Rockwell C37-42
STYLE
MASTER
THREAD SIZE
1.12-12
TRACK-TYPE TRACTOR,
Compatible equipment models: 5P8222:
Number on catalog scheme:
2
For full view, you need register
Information:
Removal Procedure
Start By:
Connect steering frame lock. Refer to Disassembly and Assembly , "Steering Frame Lock - Seperate and Connect".
Release the hydraulic system pressure. Refer to Disassembly and Assembly , " Hydraulic System Pressure - Release". Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01238420
Illustration 2 g01238423
Disconnect hose assemblies (1) and adapter fitting (4). Remove bolts (2) and relief valve assembly (3). Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 3 g01238423
Illustration 4 g01238420
Position relief valve assembly (3) and install bolts (2). Connect adapter fitting (4) and hose assemblies (1). End By:
Separate steering frame lock. Refer to Disassembly and Assembly , "Steering Frame Lock - Seperate and Connect".
Start By:
Connect steering frame lock. Refer to Disassembly and Assembly , "Steering Frame Lock - Seperate and Connect".
Release the hydraulic system pressure. Refer to Disassembly and Assembly , " Hydraulic System Pressure - Release". Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01238420
Illustration 2 g01238423
Disconnect hose assemblies (1) and adapter fitting (4). Remove bolts (2) and relief valve assembly (3). Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 3 g01238423
Illustration 4 g01238420
Position relief valve assembly (3) and install bolts (2). Connect adapter fitting (4) and hose assemblies (1). End By:
Separate steering frame lock. Refer to Disassembly and Assembly , "Steering Frame Lock - Seperate and Connect".
Caterpillar parts catalog:
Parts bolt Caterpillar catalog:
120, 120B, 120G, 128, 12E, 12F, 12G, 130G, 140, 140B, 140G, 14E, 14G, 14H, 14H NA, 16, 160G, 163, 1673C, 1693, 16G, 16H, 16H NA, 172, 193, 215, 215B, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 153, 160G, 160H, 160H ES, 160H...
1140, 1150, 120, 120B, 12E, 12F, 140, 140B, 14E, 153, 16, 163, 1673, 1673B, 172, 173B, 183B, 193, 215, 215B, 225, 235, 235B, 245, 3176B, 3176C, 3196, 3204, 3208, 3304, 3306, 3306B, 3406, 3406B, 3406C,...
235, 3176B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 351...
12E, 1693, 225, 24H, 24M, 3176B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3456, 3516B, 508, 5130B, 572G, 578, 583H, 589, 5...
120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14G, 14H, 14H NA, 153,...
1140, 120, 120G, 128, 129, 12E, 12F, 140, 140B, 140G, 14E, 14G, 153, 16, 163, 16G, 16H, 16H NA, 173B, 215, 225, 229, 235, 245, 245B, 245D, 3116, 3126, 3126B, 330 L, 3304, 3306, 3306B, 3306C, 330B, 330...
120, 120B, 129, 12E, 140, 140B, 14E, 1674, 1676, 173B, 183, 183B, 191, 214, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 41, 426, 428, 44, 46, 508, 561B, 561C, 561H, 571G, 572G, 578, 583H, 583K, 589, 594, ...
16, 1673, 1674, 1676, 1693, 215, 225, 24H, 3208, 3304, 3306, 3306C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5110B, 5130,...
1140, 1145, 1150, 117, 120G, 12E, 140, 16, 173B, 183B, 184, 215, 225, 235, 235B, 245, 3208, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 41, 5130, 5130B, 5230, 5230B, 561H, 583H, 611, 6...
12G, 140G, 14G, 16G, 24H, 3408, 5110B, 518C, 528, 528B, 530B, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC,...
10, 10S, 3608, 527, 578, 69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777B, 777D, 789, 789B, 789C, 789D, 854G, 854K, 983, 983B, 992C, 992D, D10, D11N, D11R, D11T, D7F, ...
5P9979
BOLT
D10
D10
5P9980
BOLT
D10
D10
5P9502
BOLT
D10
D10
8P9092
BOLT
10
10
1A0762
BOLT
D7G
D7G
1S4610
BOLT
D8H, D8K
D8H, D8K
1D4652
BOLT
D7G
D7G
7K6692
BOLT
815
815
7J3425
BOLT
D8K
D8K
7N7954
BOLT
814B
814B
0T0057
BOLT
D10
D10