6C3241 BOLT Caterpillar parts
12K, 140K, 140K 2, 160K, 215C, 229, 235C, 235D, 916
Rating:
Alternative (cross code) number:
CA6C3241
6C-3241
6C3241
CA6C3241
6C-3241
6C3241
Weight: 0.11 pounds 0 kg.
Information:
GRIP LENGTH
6.35
mm
HEAD HEIGHT
9.8
mm
HEX SIZE
19.05
mm
LENGTH
38.1
mm
MATERIAL
Steel 1170 MPa Min Tensile Strength
THREAD SIZE
.50-13
COATING/PLATING
Dacromet 320 Plus L Coating
EXCAVATOR, WHEEL LOADER,
This part in 2 request:
Show.
This information for suppliers only!
2022-02-06
2021-12-01
Compatible equipment models: 6C3241:
Number on catalog scheme:
8
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Remove the combustion body group (ARD). Refer to Disassembly and Assembly, "Combustion Body Group (ARD) - Remove".
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01266372
Fasten Tooling (A) and a suitable lifting device to flywheel housing (1). The weight of flywheel housing (1) is approximately 25 kg (55 lb).
Illustration 2 g01266373
Remove bolts (2) and bolt (3). Remove bolts (4).
Illustration 3 g01266377
Remove bolts (5) that fasten the engine oil pan to flywheel housing (1). Remove flywheel housing (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 1U-8846 Sealant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Apply Tooling (B) to the entire mounting face of the flywheel housing prior to installation.
Illustration 4 g01266372
Fasten Tooling (A) and a suitable lifting device to flywheel housing (1). The weight of flywheel housing (1) is approximately 25 kg (55 lb). Position flywheel housing (1) on the cylinder block.
Illustration 5 g01266377
Install bolts (5) that fasten the engine oil pan to flywheel housing (1).
Illustration 6 g01266373
Install bolts (4). Install bolt (3). Install bolts (2).
Check the flywheel housing runout. Refer to the Testing and Adjusting, "Flywheel Housing - Inspect". End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
Install the combustion body group (ARD). Refer to Disassembly and Assembly, "Combustion Body Group (ARD) - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Remove the combustion body group (ARD). Refer to Disassembly and Assembly, "Combustion Body Group (ARD) - Remove".
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01266372
Fasten Tooling (A) and a suitable lifting device to flywheel housing (1). The weight of flywheel housing (1) is approximately 25 kg (55 lb).
Illustration 2 g01266373
Remove bolts (2) and bolt (3). Remove bolts (4).
Illustration 3 g01266377
Remove bolts (5) that fasten the engine oil pan to flywheel housing (1). Remove flywheel housing (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 1U-8846 Sealant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Apply Tooling (B) to the entire mounting face of the flywheel housing prior to installation.
Illustration 4 g01266372
Fasten Tooling (A) and a suitable lifting device to flywheel housing (1). The weight of flywheel housing (1) is approximately 25 kg (55 lb). Position flywheel housing (1) on the cylinder block.
Illustration 5 g01266377
Install bolts (5) that fasten the engine oil pan to flywheel housing (1).
Illustration 6 g01266373
Install bolts (4). Install bolt (3). Install bolts (2).
Check the flywheel housing runout. Refer to the Testing and Adjusting, "Flywheel Housing - Inspect". End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
Install the combustion body group (ARD). Refer to Disassembly and Assembly, "Combustion Body Group (ARD) - Install".
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14G, 14H, 14H NA, 14M, 160H, 160H ES, 160H NA,...
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 583R, 583T, D10T, D9R, D9T
120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 320D FM, 320D FM RR, 320E, 320E L, 777G, 953D, 963C, 963D, SNOW...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140M, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 160M, 163H, 163H NA, 594, 594H, D8H, PR...
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 657E, 772B, 773B, 777, D10
12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 627E, 627F, 627G, 627H, 627K, 627K LRC
120K, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 938F, 938G, 938G II, 938H, 950G, 950G II, 950H, 950K...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 637G, 770, 770G, 770G OEM, 772, ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
229, 229D, 235C, 235D, 245B, 245D
12K, 140K, 140K 2, 160K, 215C, 229, 229D, 245B, 245D, 916
235D, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 994, 994D, 994F, 994H, AD45, AE40 II, D10, D6H, D7H, D9L
7X3365
BOLT
231D, 235D, D11R
231D, 235D, D11R
3G9717
BOLT-STOP
231D, 235D, 973
231D, 235D, 973
214B, D6R, D6R II, D6R III, D7R, D7R II, D8R, D8R II, D9R, D9T, FB518, R1700 II, R1700G
229, 320 L
7X3179
BOLT
215, 824G II, 825C, 825G, 825G II, 826C, 826G, 826G II, 980G, 980G II, 980H, D6R, D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL, R1700 II
215, 824G II, 825C, 825G, 825G II, 826C, 826G, 826G II, 980G, 980G II, 980H, D6R, D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL, R1700 II
215C
215C, 229, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM
245, 777F, 777G, D10T, D10T2