BOLT 6K9794 - Caterpillar

Illustration 1 g02174984
Note: Set the bottom edge of the mainframe and extender frame deflectors to be 26.7 1.5 mm (1.05 0.06 inch) from the bottom of the screed plate.
Table 1
Specification for 342-5917 Deflector Gp    
Item     Qty     Part     Specification Description    
1     22     129-3180 Locknut     Torque to
40.7 10.0 N m (30.0 7.4 lb ft). Then, back off locknuts (1) by half of a turn.    
2     4     328-3523 Rod As     After deflector height is set, Tighten center nut to standard torque. Verify deflector height after tightening    
3     4     284-9087 Adjusting Rods     After deflector height is set, Tighten center nut to standard torque. Verify deflector height after tightening.    
4     8     107-2784 Flat Head Screws     Torque to
60 12 N m (44 9 lb ft).