BOLT 6V1050 - Caterpillar

6V1050 BOLT Caterpillar parts 24H, CS-583, D10N, D10R, D11N, D11R, D8L, D9L

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6V1050
6V-1050
6V1050

Weight: 0.010 pounds 0 kg.

Information:

GRIP LENGTH 161.92 mm

HEAD HEIGHT 6.15 mm

HEX SIZE 12.7 mm

LENGTH 190.5 mm

MATERIAL Steel 1035 MPa Min Tensile Strength Rc 33-39

THREAD SIZE .31-18

Buy BOLT 6V1050 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER, VIBRATORY COMPACTOR,

Show more prices Caterpillar parts

Compatible equipment models: 6V1050:

MOTOR GRADER 24H

TRACK-TYPE TRACTOR D10N D10R D11N D11R D8L D9L

VIBRATORY COMPACTOR CS-583 Caterpillar

Number on catalog scheme: 9

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

24H Motor Grader 7KK00001-UP (MACHINE) POWERED BY 3412E Engine

117-5309: VALVE GP-TRANSMISSION CONTROL » (5/16-18X7.5-IN) SEBP24660403
136-3738: VALVE GP-TRANSMISSION CONTROL » (5/16-18X7.5-IN) SEBP24660404
136-3738: VALVE GP-TRANSMISSION CONTROL » (5/16-18X7.5-IN) SEBP24660405

D11N Track-Type Tractor Power Shift 4HK00001-UP (MACHINE) POWERED BY 3508 Engine

9T-7884: VALVE GP-BANK 3 » (5/16-18X7.5-IN) SEBP21690442
9T-7884: VALVE GP-BANK 3 » (5/16-18X7.5-IN) SEBP21690443

D10N Track-Type Tractor 3SK00001-UP (MACHINE) POWERED BY 3412 Engine

9T-7884: VALVE GP-BANK 3 » (5/16-18X7.5-IN) SEBP22370367

D10R Track-Type Tractor 3KR00001-UP (MACHINE) POWERED BY 3412 Engine

9T-7884: VALVE GP-BANK 3 » (5/16-18X7.5-IN) SEBP24780699
9T-7884: VALVE GP-BANK 3 » (5/16-18X7.5-IN) SEBP24780700

D11R Track-Type Tractor Power Shift 8ZR00001-UP (MACHINE) POWERED BY 3508 Engine

9T-7884: VALVE GP-BANK 3 » (5/16-18X7.5-IN) SEBP25540557
9T-7884: VALVE GP-BANK 3 » (5/16-18X7.5-IN) SEBP25540558

D11R Track-Type Tractor 9TR00001-UP (MACHINE) POWERED BY 3508 Engine

9T-7884: VALVE GP-BANK 3 » (5/16-18X7.5-IN) SEBP26820655
9T-7884: VALVE GP-BANK 3 » (5/16-18X7.5-IN) SEBP26820656

Information:

Removal Procedure
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01173069
Remove bolts (1) from water temperature regulator housing (2).
Illustration 2 g01173071
Remove water temperature regulator housing (2). Remove gasket (3). Remove water temperature regulators (4).
Illustration 3 g01173074
Remove seal (5) from water temperature regulator housing (2). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 221-8647 Seal Installer 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the mating surfaces of the water temperature regulator housings.
Illustration 4 g01173077
Use Tooling (A) and install seal (5) into water temperature regulator housing (2).
Illustration 5 g01173071
Illustration 6 g01173069
Install water temperature regulators (4). Install a new gasket (3).
Position water temperature regulator housing (2). Install bolts (1).
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" and Operation and Maintenance Manual, "Capacities (Refill)".